Re: [CAD_CAM_EDM_DRO] GeckoDrives.. Can anyone Help?

> My next project is to convert a Drill/Mill to 3 axis CNC. a project
> that many of you have already completed. I am considering getting
> three GeckoDrives to power this CNC. I am a little confused after
> going to their site. There are four to choose from, (G201, G210,
> G320, G340) The G201 is the most expensive so I assume it is the
> best. But do I need the best?
>
> I don't plan to make this a closed loop servo system. Does anyone
> know what the difference is between the four GeckDrives and which
> would be the best to get?
>
> Thanks
>
> Jeff aka CADMAN
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/