CAD CAM EDM DRO - Yahoo Group Archive

Re: Linux/EMC

on 1999-10-11 19:37:25 UTC
Chris, thanks for the response. RTlinux and linux
both fail at the same spot. I had to modify the
lilo.conf file, to be compatible with my scsi hdisk,
changed the hda to sda, and then it started to the
halt point.

Steve Carlisle

----------
From: stratton@...
To: CAD_CAM_EDM_DRO@onelist.com
Subject: Re: [CAD_CAM_EDM_DRO]Linux/EMC
Date: Monday, October 11, 1999 6:06 PM

From: stratton@...

> From: "Steve Carlisle" <quatsein@...>
>
> Well, another failed RTlinux script install
> Failure notes below;
>
>
----------------------------------------------------------------------------

>
> Partition check:
> VFS: Cannot open root device 08:05
> Kernel panic: VFS: Unable to mount root fs on 08:05
>
----------------------------------------------------------------------------

>

The kernel is getting read off your disk, but it is having trouble
finding or reading the rest of the disk once it is loaded. My guess
would be that lilo did not get installed properly (it is supposed to
tell the kernel what disk the rest of linux should be loaded off of).
Did you leave yourself an option to boot the old kernel? If so, or if
you know how to go in from a rescue disk then you can probably fix it -
but using the rescue disk takes some knowledge of linux, in particular
a familiarity with the mount command.

Chris


--
Christopher C. Stratton, stratton@...
Engineer, Instrument Maker & Horn Player
(978)538-5179 work, (617)492-3358 home
30 Griswold Street Cambridge, MA 02138
http://www.mdc.net/~stratton

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager

Discussion Thread

Dan Falck 1999-10-11 15:57:39 UTC Re: Linux/EMC Steve Carlisle 1999-10-11 18:32:20 UTC Re: Linux/EMC Steve Carlisle 1999-10-11 18:54:57 UTC Re: Linux/EMC Bob Bachman 1999-10-11 20:56:37 UTC Re: Linux/EMC stratton@x... 1999-10-11 18:06:57 UTC Re: Linux/EMC Steve Carlisle 1999-10-11 19:37:25 UTC Re: Linux/EMC stratton@x... 1999-10-11 18:34:35 UTC Re: Linux/EMC Steve Carlisle 1999-10-11 20:03:03 UTC Re: Linux/EMC Marshall Pharoah 1999-10-12 04:53:42 UTC Re: Linux/EMC batwings@x... 1999-10-11 10:18:33 UTC Re: Linux/EMC Darrell Gehlsen 1999-10-12 10:26:31 UTC Re: Linux/EMC Ian Wright 1999-10-12 03:43:20 UTC Re: Linux/EMC Steve Carlisle 1999-10-12 17:04:42 UTC Re: Linux/EMC Steve Carlisle 1999-10-12 17:20:32 UTC Re: Linux/EMC Jon Elson 1999-10-12 23:02:25 UTC Re: Linux/EMC Marshall Pharoah 1999-10-13 04:10:32 UTC Re: Linux/EMC Ian Wright 1999-10-13 11:21:15 UTC Re: Linux/EMC Steve Carlisle 1999-10-13 17:11:55 UTC Re: Linux/EMC Steve Carlisle 1999-10-13 17:56:39 UTC Re: Linux/EMC stratton@m... 1999-10-14 06:47:33 UTC Re: Linux/EMC Steve Carlisle 1999-10-14 08:12:44 UTC Re: Linux/EMC stratton@m... 1999-10-14 06:58:50 UTC Re: Linux/EMC Steve Carlisle 1999-10-14 08:19:50 UTC Re: Linux/EMC Ian Wright 1999-10-14 12:48:18 UTC Re: Linux/EMC Steve Carlisle 1999-10-14 17:25:18 UTC Re: Linux/EMC Steve Carlisle 1999-10-17 10:42:56 UTC Re: Linux/EMC