Re: Survey Please read

Sorry about the edge finder, I forgot... just to show my ignorance on
the subject what is an edge finder ?
Remember Electronics and Software are what I do for a living CNC Mill is
more of a hobby...
hansw

Marshall Pharoah wrote:

>
> From: "Marshall Pharoah" <m_pharoah@...>
>
> It may have been on alt.machines.cnc, a place I rarely go. I was looking
> at the MAXCNC but you have convinced me otherwise. Since it's but a
> hobby for me, I have plenty of time to look at alternatives.
>
> By the way, could you tell me where you get an edge finder that small?
>
> Marshall
>
> ----- Original Message -----
> From: hansw <hansw@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: Thursday, January 27, 2000 3:33 PM
> Subject: Re: [CAD_CAM_EDM_DRO]Survey Please read
>
> > Yes, I had problems with the MAXNC belts, did I miss someone complaining
> > about that on this forum ? or was it else where. I would like to know
> > who they are, and point them to my web site where I have documented the
> > belt problem and my fix for it.
> >
> > You know when I told MAXNC about the problem, I was told "I was the only
> > customer that had the problem" !
> > I have all of the collects they make and 5/16 is the largest.
> >
> > With the knowledge I've gain from this list and elsewhere I would make
> > an attempt at converting the Grizzly, in fact later this year I may do
> > just that.
> >
> > Thanks.
> > Hans Wedemeyer
> > web site http://home.swbell.net/hans_w/index.htm
> >
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GET A NEXTCARD VISA, in 30 seconds. Get rates as low as 0.0 percent
> Intro or 9.9 percent Fixed APR and no hidden fees. Apply NOW.
> <a href=" http://clickme.onelist.com/ad/NextcardCreative5SR ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager