CAD CAM EDM DRO - Yahoo Group Archive

Re: Survey Please read

Posted by hansw
on 2000-01-26 08:32:51 UTC
>
> Enhanced Machine Controller Feedback Form
>
> ABSTRACT:
> This study of the effects that the EMC program has made on your company
> will be utilized for a project at Worcester Polytechnic Institute. We are
> currently researching the EMC program in Small to Medium sized
> Manufacturers (SME). The results will be integrated in the final
> effectiveness of EMC.
>
> INSTRUCTIONS:
> Below are a few questions that will enable this study to get a better
> understanding on how EMC has effected the production and effectiveness of
> your company. Answer the questions with a sentence, or a yes or no. In the
> remarks section feel free to add any other information that will help this
> study.
>
> Q1. How has EMC affected the overall production time and rate per piece?
> A1. ZERO
>
> Q2. What costs have been reduced from the implementation of EMC?
> A2.
>
> Q3. Has the EMC program reduced any jobs that were prior needed for the
> task that EMC is now doing?
> A3. NO
>
> Q4. With the introduction to EMC would you now upgrade to a more in depth
> CAM package?
> A4. YES
>
> Q5. How difficult was it for you to find out about and obtain EMC? Would
> there have been a better way?
> A5. VERY
>
> Q6. How difficult was the setup/retrofit of your equipment? Could you
> think of some better way of doing this?
> A6. Nightmare, Linux is a mess I simply gave up and found something else
>
> Q7. What are the best and worst experiences that you've had throughout
> the whole process of finding and installing EMC?
> A7. ZERO ZERO ZERO O moved to CNCPro it works.
>
> Q8. What was the cost of the implementation?
> A8. TIME and I can;t afford time..
>
> Q9. How long did the overall implementation take?
> A9. Tried for a day and then found it was much to much of a nightmare . Linux never worked.
>
> Q10. What kind of machine/brand/model/controller/motors were converted?
> A10. n/a
>
> Q11. Any further remarks that will help this study appreciate the
> effectiveness of the EMC program?
> A11. Move to Windows NT2000 and thing will become more real. Linux is the nightmare that will destroy EMC
>

Discussion Thread

hansw 2000-01-26 08:32:51 UTC Re: Survey Please read Darrell 2000-01-26 13:04:43 UTC Re: Survey Please read hansw 2000-01-26 13:37:55 UTC Re: Survey Please read Harrison, Doug 2000-01-26 16:47:46 UTC RE: Survey Please read Steve Carlisle 2000-01-26 18:09:25 UTC Re: Survey Please read Steve Carlisle 2000-01-26 18:12:58 UTC Re: Survey Please read Marshall Pharoah 2000-01-26 16:54:45 UTC Re: Survey Please read Ted Robbins 2000-01-26 17:36:17 UTC Re: Survey Please read Ted Robbins 2000-01-26 17:45:08 UTC Re: Survey Please read hansw 2000-01-26 19:05:31 UTC Re: Survey Please read Karl Klemm 2000-01-26 19:16:20 UTC Re: Survey Please read Steve Carlisle 2000-01-26 19:53:15 UTC Re: Survey Please read Ian Wright 2000-01-27 07:15:02 UTC Re: Survey Please read hansw 2000-01-27 09:40:26 UTC Re: Survey Please read hansw 2000-01-27 09:59:55 UTC Re: Survey Please read Marshall Pharoah 2000-01-27 12:14:45 UTC Re: Survey Please read paul@A... 2000-01-27 12:14:45 UTC Re: Survey Please read hansw 2000-01-27 12:33:01 UTC Re: Survey Please read paul@A... 2000-01-27 12:33:01 UTC Re: Survey Please read Marshall Pharoah 2000-01-27 12:49:06 UTC Re: Survey Please read hansw 2000-01-27 13:03:27 UTC Re: Survey Please read Marshall Pharoah 2000-01-27 18:13:23 UTC Re: Survey Please read hansw 2000-01-27 18:50:04 UTC Re: Survey Please read Karl Klemm 2000-01-27 18:53:43 UTC Re: Survey Please read Ward M. 2000-01-27 20:09:32 UTC Re: Survey Please read Jon Elson 2000-01-27 22:49:01 UTC Re: Survey Please read hansw 2000-01-27 23:12:20 UTC Re: Survey Please read Craig C Chamberlin 2000-01-27 23:39:24 UTC Re: Survey Please read Ian Wright 2000-01-27 15:02:21 UTC Re: Survey Please read hansw 2000-01-28 06:53:50 UTC Re: Survey Please read Ron Ginger 2000-01-30 18:21:43 UTC Re: Re: Survey Please read Matt Shaver 2000-01-31 00:45:09 UTC Re: Survey Please read