Re: [CAD_CAM_EDM_DRO] Roller Bearings link ? ( was Bad Bearing ( was Re: stuck stepper

Erik,

Another thing to consider - I recall a colleague mentioning that there
is a Loctite product which is designed for taking up slack in a loose
bearing housing mount. I seem to recall it could take up 1-2 thou but
not much more. I have no idea what its product # is but you might check
their website and email them a tech question.

Another radical thought, don't you have a cnc mill? Why not remake the
entire end cap?

Cheers, Peter


Erik Reikes wrote:

>--- In CAD_CAM_EDM_DRO@y..., bjammin@i... wrote:
>
>>At 06:10 PM 9/13/02 -0000, you wrote:
>>
>>>When you get the new bearing here's a little trick I use to get a
>>>press fit in a slightly too large hole. Put the housing in a vise
>>>and use a center punch to create a series of divots around the
>>>
>inside
>
>>>of the bearing seat. These divots will displace some metal up and
>>>allow you to press in a new bearing in a slightly too large hole.
>>>
>>Not really reliable ... knurling is better. But the raised metal is
>>
>way low
>
>>in surface area and will often simply fret away or be pushed back
>>
>down.
>
>>Regards, Hoyt McKagen
>>
>
>How do you knurl the inside of a bearing seat? I've seen knurling
>tools for outside diameters, but I didn't know there was such a thing
>for an internal curve.
>
>-Erik Reikes
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>