CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: G201-IP

Posted by Jon Elson
on 2002-11-26 23:42:17 UTC
mariss92705 wrote:

>Tom,
>
>Talking about idiots. Our test stands take both the G201/G210s as
>well as the G320/G340s. A single, large switch has to be thrown for
>one or the other.
>
>If you stick a G201 into the stand while the single, large switch
>(prominently marked) is in the "G320" setting, it will totally fry
>and dismember the encoder on the test servomotor.
>
>I have gone thru 6 encoders this way, the latest one tonite. Nuff
>said; idiots are everywhere, even I are one.
>
>
Well, this is not idiocy, if you do some complex procedure enough times,
ANYONE
will make a mistake eventually. The only way to avoid this is to have
some sort of
wiring harness that prevents the wrong things from being connected.
That requires
that the different models would have a somewhat different pinout so the
wrong connector
won't fit the wrong model.

Jon

Discussion Thread

mariss92705 2002-11-23 13:41:41 UTC G201-IP Jim Brown 2002-11-23 14:38:41 UTC Re: [CAD_CAM_EDM_DRO] G201-IP Keith Bowers 2002-11-23 14:47:54 UTC Re: [CAD_CAM_EDM_DRO] G201-IP mariss92705 2002-11-23 15:16:28 UTC Re: G201-IP Kory Hamzeh 2002-11-23 15:34:13 UTC RE: [CAD_CAM_EDM_DRO] G201-IP James Cullins 2002-11-23 16:10:41 UTC Re: [CAD_CAM_EDM_DRO] G201-IP turbulatordude 2002-11-23 16:39:34 UTC Re: G201-IP Ron Kline 2002-11-23 18:55:17 UTC Re: [CAD_CAM_EDM_DRO] G201-IP Peter 2002-11-23 19:15:50 UTC Re: [CAD_CAM_EDM_DRO] G201-IP kdoney_63021 2002-11-23 20:14:53 UTC Re: G201-IP Tony Jeffree 2002-11-23 22:02:41 UTC Re: G201-IP deanc500 2002-11-23 23:24:17 UTC Re: G201-IP galt1x 2002-11-24 03:25:56 UTC Re: [CAD_CAM_EDM_DRO] G201-IP Thomas E. Jones 2002-11-24 10:00:20 UTC Re: G201-IP JanRwl@A... 2002-11-24 12:37:38 UTC Re: [CAD_CAM_EDM_DRO] G201-IP JanRwl@A... 2002-11-24 12:46:18 UTC Re: [CAD_CAM_EDM_DRO] Re: G201-IP John Johnson 2002-11-24 13:50:16 UTC Re: [CAD_CAM_EDM_DRO] Re: G201-IP Carol & Jerry Jankura 2002-11-24 14:43:10 UTC RE: [CAD_CAM_EDM_DRO] Re: G201-IP turbulatordude 2002-11-24 20:01:56 UTC Re: G201-IP turbulatordude 2002-11-24 20:03:58 UTC Re: G201-IP turbulatordude 2002-11-24 20:06:17 UTC Re: G201-IP mariss92705 2002-11-24 22:51:31 UTC Re: G201-IP jmkasunich 2002-11-25 06:39:20 UTC Re: G201-IP jmkasunich 2002-11-25 07:02:22 UTC Re: G201-IP n4onl 2002-11-25 08:02:51 UTC Re: G201-IP pt_green 2002-11-25 21:58:41 UTC Re: G201-IP mayfieldtm 2002-11-26 12:58:24 UTC Re: G201-IP mariss92705 2002-11-26 17:46:31 UTC Re: G201-IP Marv Frankel 2002-11-26 18:21:28 UTC Re: [CAD_CAM_EDM_DRO] Re: G201-IP Jon Elson 2002-11-26 23:42:17 UTC Re: [CAD_CAM_EDM_DRO] Re: G201-IP Nicolas Benezan 2002-11-27 02:39:42 UTC Re: [CAD_CAM_EDM_DRO] G201-IP