Yeager CNC Pro and relay settings
Posted by
shelbyshepherd2002
on 2003-07-31 02:53:06 UTC
Hi all,
I need some help on the settings within CNC pro for a solid state
relay to activate a solinoid.
It is using pin 1 to the neg on the relay and 5 volt to positive
from games port, should it be set on high or low?
This is the sample G code I used to test with but the relay did not
appear to work.
G01 X5 Y5
M01 (to turn on)
M0 (to turn off)
X0 Y0
Any ideas welcome on settings or a sample G code to test with.
I need some help on the settings within CNC pro for a solid state
relay to activate a solinoid.
It is using pin 1 to the neg on the relay and 5 volt to positive
from games port, should it be set on high or low?
This is the sample G code I used to test with but the relay did not
appear to work.
G01 X5 Y5
M01 (to turn on)
M0 (to turn off)
X0 Y0
Any ideas welcome on settings or a sample G code to test with.
Discussion Thread
shelbyshepherd2002
2003-07-31 02:53:06 UTC
Yeager CNC Pro and relay settings
fortino
2003-07-31 06:36:00 UTC
Re: [CAD_CAM_EDM_DRO] Yeager CNC Pro and relay settings
Torsten
2003-07-31 11:21:53 UTC
Re: Yeager CNC Pro and relay settings
Alan Marconett KM6VV
2003-07-31 11:46:24 UTC
Re: [CAD_CAM_EDM_DRO] Yeager CNC Pro and relay settings
shelbyshepherd2002
2003-07-31 13:21:40 UTC
Re: Yeager CNC Pro and relay settings
Alan Marconett KM6VV
2003-07-31 15:46:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
fortino
2003-07-31 16:04:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
Raymond Heckert
2003-07-31 18:22:55 UTC
Re: [CAD_CAM_EDM_DRO] Yeager CNC Pro and relay settings
shelbyshepherd2002
2003-08-01 01:35:51 UTC
Re: Yeager CNC Pro and relay settings
Alan Marconett KM6VV
2003-08-01 10:21:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
shelbyshepherd2002
2003-08-01 14:19:45 UTC
Re: Yeager CNC Pro and relay settings
Alan Marconett KM6VV
2003-08-01 15:23:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
James Cullins
2003-08-01 20:41:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
shelbyshepherd2002
2003-08-01 21:08:29 UTC
Re: Yeager CNC Pro and relay settings
James Cullins
2003-08-01 21:21:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings
markpowerplus
2003-08-03 14:10:23 UTC
Re: Yeager CNC Pro and relay settings
shelbyshepherd2002
2003-08-05 02:24:07 UTC
Re: Yeager CNC Pro and relay settings
Jon Elson
2003-08-05 10:43:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Yeager CNC Pro and relay settings