Re: [CAD_CAM_EDM_DRO] Re: M57-102 < - - - - > PC

Thanks for responding. Yes, the drivers (amps) have
the same model number on them as the motors, M57-102,
and connections on the back for 110V AC, a connection
for the motor, and a cable with a 25 pin connector
which also has a 4 pin connector wired into it.

Randy

--- turbulatordude <davemucha@...> wrote:

> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "m0nkey0ne"
> <m0nkey0ne@y...>
> wrote:
> > I have acquired a couple Compumotor motors and
> amps and downloaded
> > the user manual. However I have no idea how to
> make my PC with
> > Windows control these motors. Any tips from you
> guys would be
> > greatly appreciated. I have read many pages and
> links of CNC
> > material here, but have not exhausted the
> resource. Posting this
> > plea for help may be quicker or more effective.
> Thanks.
>
>
>
> It sounds like you have a stepper motor
> and a matching driver
> and a PC
> but no software ?
>
> Check the 'amp' (I'm assuming this is a electronical
> gizmo that is a
> interface that contorls the motor, a thing called a
> driver)
>
> it should have power connector from the power
> source, AC or DC with
> enough amps to power the motor
>
> it should have logic inputs for step and direction
>
> it should have low voltage inputs for logic, or just
> 3 wires for step
> and direction.
>
> I guess, we need more info on what you are calling
> an 'amp' got a
> model number or a description ?
>
> Dave
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> [Moderators]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this to be a sister site to the CCED group,
> as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com