CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] What size capacitor should I use?

on 2005-03-22 14:43:20 UTC
I think the rectifier comment while applicable to inrush current was
more directed to steady-state.

Higher capacitance reduces the ripple AND reduces phase duration of the
conducting rectifier. To deliver the same power in a shorter phase
duration, the rectifier will be required to pass larger (but shorter)
current pulse to the capacitors.

-----Original Message-----
From: Simon Arthur [mailto:chroma@...]
Sent: Thursday, January 27, 2005 12:02 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] What size capacitor should I use?


Well, no, I believe he died some years back. Mr. John Guess. He was a
great teacher, though I confess that I have forgotten much of what I
learned.

After reading this thread, I realize that I was right, but for the wrong

reasons. PS caps CAN be too large. Large caps filter low frequencies
(like 120 Hz from the wall) just fine, but don't deal with the HF stuff
as well due to internal resistance.

JanRwl@... wrote:

>
>In a message dated 1/26/2005 4:15:07 P.M. Central Standard Time,
>chroma@... writes:
>
>I was told this by my high school electronics teacher.
>
>
>And he is PAID for what he teaches?
>
>


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

rllalonde2000 2005-01-26 04:28:01 UTC What size capacitor should I use? A. G. Eckstein 2005-01-26 04:58:31 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Simon Arthur 2005-01-26 05:38:23 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? R Rogers 2005-01-26 06:56:31 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Terrenoire, Adrien L 2005-01-26 07:00:14 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Andy Wander 2005-01-26 07:01:23 UTC RE: [CAD_CAM_EDM_DRO] What size capacitor should I use? turbulatordude 2005-01-26 07:07:50 UTC Re: What size capacitor should I use? - voltage ? A. G. Eckstein 2005-01-26 07:13:30 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? caudlet 2005-01-26 08:00:51 UTC Re: What size capacitor should I use? Bengt 2005-01-26 09:11:26 UTC Re: What size capacitor should I use? Jon Elson 2005-01-26 09:28:27 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Roy J. Tellason 2005-01-26 09:44:34 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? turbulatordude 2005-01-26 09:58:26 UTC Re: What size capacitor should I use? Andy Wander 2005-01-26 10:19:07 UTC RE: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? caudlet 2005-01-26 11:29:56 UTC Re: What size capacitor should I use? Roy J. Tellason 2005-01-26 11:41:56 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? Rob Polley 2005-01-26 11:43:12 UTC Looking for advice Dan Mauch 2005-01-26 12:18:29 UTC Re: [CAD_CAM_EDM_DRO] Looking for advice Codesuidae 2005-01-26 12:34:15 UTC Re: [CAD_CAM_EDM_DRO] Looking for advice victorlorenzo@y... 2005-01-26 12:55:47 UTC Re: Looking for advice Stephen Wille Padnos 2005-01-26 13:38:53 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? John 2005-01-26 14:04:29 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? Simon Arthur 2005-01-26 14:09:40 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? erie 2005-01-26 14:33:11 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? Stephen Wille Padnos 2005-01-26 14:37:28 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? R Rogers 2005-01-26 14:56:53 UTC [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? Amps? Kv? Kva? JanRwl@A... 2005-01-26 15:04:42 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Les Newell 2005-01-26 15:05:07 UTC Re: [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? Amps? Kv? Kva? cnc_4_me 2005-01-26 15:08:24 UTC Re: What size capacitor should I use? David Paulson 2005-01-26 15:10:21 UTC Re: [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? Amps? Kv? Kva? cnc_4_me 2005-01-26 15:23:15 UTC Re: Toroidal transformer ratings?? Amps? Kv? Kva? JanRwl@A... 2005-01-26 15:40:19 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? R Rogers 2005-01-26 15:49:48 UTC Re: [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? What after being rectified? cnc_4_me 2005-01-26 15:55:58 UTC Re: What size capacitor should I use? cnc_4_me 2005-01-26 16:14:14 UTC Re: Toroidal transformer ratings?? What after being rectified? R Rogers 2005-01-26 16:18:19 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use?sizing supply Ron Ginger 2005-01-26 17:01:36 UTC Re: Looking for advice polaraligned 2005-01-26 17:09:38 UTC What size capacitor should I use? Polaraligned 2005-01-26 17:25:09 UTC Re: Toroidal transformer ratings?? Amps? Kv? Kva? R Rogers 2005-01-26 17:29:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Looking for advice cnc_4_me 2005-01-26 18:05:05 UTC Re: What size capacitor should I use? victorlorenzo@y... 2005-01-26 18:19:00 UTC Re: Looking for advice codeSuidae 2005-01-26 18:32:59 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? cnc_4_me 2005-01-26 18:54:06 UTC Re: What size capacitor should I use? Ken Langston 2005-01-26 18:56:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? Amps? Kv? Kva? cnc_4_me 2005-01-26 19:01:47 UTC Re: Toroidal transformer ratings?? Amps? Kv? Kva? Rob Polley 2005-01-26 19:24:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Looking for advice codeSuidae 2005-01-26 19:26:51 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? cnc_4_me 2005-01-26 19:35:49 UTC Re: Looking for advice bobmcknight@c... 2005-01-26 19:37:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? Amps? Kv? Kva? bobmcknight@c... 2005-01-26 19:37:08 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? cnc_4_me 2005-01-26 19:54:55 UTC Re: What size capacitor should I use? turbulatordude 2005-01-26 19:57:22 UTC Re: What size capacitor should I use? resistors.... cnc_4_me 2005-01-26 20:08:00 UTC Re: What size capacitor should I use? resistors.... JanRwl@A... 2005-01-26 21:34:22 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? JanRwl@A... 2005-01-26 21:43:19 UTC Re: [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? Amps? Kv? Kva? codeSuidae 2005-01-26 21:56:30 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? Jon Elson 2005-01-26 21:56:33 UTC Re: [CAD_CAM_EDM_DRO] Toroidal transformer ratings?? What after being rectified? Mariss Freimanis 2005-01-26 21:58:04 UTC Re: What size capacitor should I use? resistors.... Jon Elson 2005-01-26 22:08:03 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? JanRwl@A... 2005-01-26 22:09:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Looking for advice Jon Elson 2005-01-26 22:22:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? Amps? Kv? Kva? Jon Elson 2005-01-26 22:29:43 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? resistors.... Jon Elson 2005-01-26 22:33:41 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? resistors.... Simon Arthur 2005-01-27 00:01:53 UTC Re: [CAD_CAM_EDM_DRO] What size capacitor should I use? Polaraligned 2005-01-27 04:15:31 UTC Re: What size capacitor should I use? Polaraligned 2005-01-27 04:29:29 UTC Re: Toroidal transformer ratings?? What after being rectified? turbulatordude 2005-01-27 06:26:30 UTC Re: What size capacitor should I use? resistor or not ?? turbulatordude 2005-01-27 06:45:41 UTC Re: Toroidal transformer ratings?? What after being rectified? Leslie Watts 2005-01-27 07:04:52 UTC RE: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Jon Elson 2005-01-27 10:30:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Jon Elson 2005-01-27 10:40:20 UTC Re: [CAD_CAM_EDM_DRO] Re: What size capacitor should I use? resistor or not ?? cnc_4_me 2005-01-27 10:47:17 UTC Re: Toroidal transformer ratings?? What after being rectified? Les Newell 2005-01-27 12:49:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Polaraligned 2005-01-27 13:39:18 UTC Re: Toroidal transformer ratings?? What after being rectified? Stephen Wille Padnos 2005-01-27 14:44:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Polaraligned 2005-01-27 18:13:16 UTC Re: Toroidal transformer ratings?? What after being rectified? Steve Stallings 2005-01-27 18:18:44 UTC Re: Toroidal transformer ratings?? What after being rectified? Stephen Wille Padnos 2005-01-27 18:28:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Jon Elson 2005-01-27 21:35:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? Kevin Martin 2005-01-28 05:32:28 UTC RE: [CAD_CAM_EDM_DRO] Re: Toroidal transformer ratings?? What after being rectified? m0nkey0ne 2005-01-28 11:22:47 UTC Re: Toroidal transformer ratings?? What after being rectified? Mcginnis, Darrell S 2005-03-22 14:43:20 UTC RE: [CAD_CAM_EDM_DRO] What size capacitor should I use?