Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Posted by
Hugh Mahlendorf
on 2000-11-05 09:50:26 UTC
Group:
Years ago I worked for a packaging machine mfgr. We used Warner
clutch/brake assys to control film feed. Would it be possible to mount the
brake unit to the frame, have the screw extension locked to the clutch and
the handwheel locked to the brake? A switch to select CNC or manual
mode? This way the handwheel would be lock to the frame in CNC mode with
the screw free to turn; and the handwheel locked to the screw in manual
mode. Safety and convenience.
My .02
Hugh
At 05:41 PM 11/4/00 -0800, Jon Anderson wrote:
Years ago I worked for a packaging machine mfgr. We used Warner
clutch/brake assys to control film feed. Would it be possible to mount the
brake unit to the frame, have the screw extension locked to the clutch and
the handwheel locked to the brake? A switch to select CNC or manual
mode? This way the handwheel would be lock to the frame in CNC mode with
the screw free to turn; and the handwheel locked to the screw in manual
mode. Safety and convenience.
My .02
Hugh
At 05:41 PM 11/4/00 -0800, Jon Anderson wrote:
>Pete,
>
>I like that idea. As long as one doesn't start using set screws to hold
>the handwheel in and then forget to loosen it. But then, anyone that
>knowingly defeats a safety device really deserves what they get.
>(me included, though I've been lucky)
>
>I really don't like folding safety handwheels, it's not very intuitive
>to have to pry the handle out, and loosen your grip for a second, it
>snaps back into place...
>
>Jon
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
Discussion Thread
jmw@c...
2000-11-02 18:31:54 UTC
hand jive
Jon Anderson
2000-11-02 21:41:53 UTC
Re: [CAD_CAM_EDM_DRO] hand jive
Darrell
2000-11-02 22:26:36 UTC
Re: [CAD_CAM_EDM_DRO] hand jive
ballendo@y...
2000-11-03 00:03:51 UTC
re:hand jive
Smoke
2000-11-03 00:16:23 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
Wally K
2000-11-03 00:47:42 UTC
Re: re:hand jive
ballendo@y...
2000-11-03 00:52:19 UTC
Re: re:hand jive
ballendo@y...
2000-11-03 01:05:23 UTC
RE:Re: re:hand jive
ptengin@a...
2000-11-03 02:14:38 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
Jon Anderson
2000-11-03 07:03:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
Jon Anderson
2000-11-03 07:07:07 UTC
Re: [CAD_CAM_EDM_DRO] RE:Re: re:hand jive
dave engvall
2000-11-03 08:50:15 UTC
Re: [CAD_CAM_EDM_DRO] RE:Re: re:hand jive
Ray
2000-11-03 10:37:18 UTC
Re: Re: RE:Re: re:hand jive
Alan Marconett KM6VV
2000-11-03 11:01:32 UTC
re:hand jive
Jon Elson
2000-11-03 11:39:32 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
JanRwl@A...
2000-11-03 16:45:15 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
JanRwl@A...
2000-11-03 16:49:33 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
ballendo@y...
2000-11-03 17:57:27 UTC
Re: Re: re:hand jive
Jon Anderson
2000-11-03 18:46:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: re:hand jive
ballendo@y...
2000-11-03 20:43:33 UTC
Re: re: rE: RE:hand jive
Jon Anderson
2000-11-03 21:41:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: re: rE: RE:hand jive
Smoke
2000-11-03 21:53:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: re: rE: RE:hand jive
Darrell
2000-11-04 00:13:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: re:hand jive
John Stevenson
2000-11-04 02:02:27 UTC
Re: re:hand jive
dave engvall
2000-11-04 07:12:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
dougrasmussen@c...
2000-11-04 08:10:11 UTC
Re: rE: RE:hand jive
ballendo@y...
2000-11-04 14:37:17 UTC
re:Re: rE: RE:hand jive
Brian Pitt
2000-11-04 15:05:08 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Jon Anderson
2000-11-04 15:07:30 UTC
Re: [CAD_CAM_EDM_DRO] RE:hand jive
Randy Gordon-Gilmore
2000-11-04 15:28:55 UTC
Controllers, was RE:hand jive
Wally K
2000-11-04 15:29:03 UTC
re:Re: rE: RE:hand jive
Jon Anderson
2000-11-04 15:54:29 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Brian Pitt
2000-11-04 15:55:35 UTC
Re: [CAD_CAM_EDM_DRO] Controllers, was RE:hand jive
Randy Gordon-Gilmore
2000-11-04 16:01:32 UTC
Knob control, was re:hand jive
Randy Gordon-Gilmore
2000-11-04 16:15:13 UTC
Re: Controllers, was RE:hand jive
Darrell
2000-11-04 17:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
Darrell
2000-11-04 17:08:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
ptengin@a...
2000-11-04 17:12:27 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Jon Anderson
2000-11-04 17:23:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
Jon Anderson
2000-11-04 17:48:29 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Alan Marconett KM6VV
2000-11-04 20:00:39 UTC
RE:hand jive
Alan Marconett KM6VV
2000-11-04 20:29:35 UTC
re:hand jive
Brian Pitt
2000-11-04 21:20:40 UTC
Re: [CAD_CAM_EDM_DRO] RE:hand jive
Darrell
2000-11-04 22:08:30 UTC
Re: [CAD_CAM_EDM_DRO] re:hand jive
Hugh Mahlendorf
2000-11-05 09:50:26 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Anne Ogborn
2000-11-05 10:38:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
Anne Ogborn
2000-11-05 10:52:10 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Anne Ogborn
2000-11-05 10:59:52 UTC
Re: [CAD_CAM_EDM_DRO] Knob control, was re:hand jive
Anne Ogborn
2000-11-05 11:05:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:hand jive
Jeff Barlow
2000-11-05 12:39:02 UTC
Re: [CAD_CAM_EDM_DRO] Knob control, was re:hand jive
Alan Marconett KM6VV
2000-11-05 14:20:38 UTC
RE:hand jive
Brian Pitt
2000-11-05 16:27:57 UTC
Re: [CAD_CAM_EDM_DRO] RE:hand jive
Jon Elson
2000-11-05 22:01:42 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: rE: RE:hand jive
Alan Marconett KM6VV
2000-11-06 11:14:31 UTC
RE:hand jive
diazden
2000-11-06 14:43:13 UTC
Re: [CAD_CAM_EDM_DRO] RE:hand jive