Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Posted by
e.heritage@b...
on 2001-04-23 05:35:09 UTC
He he he, paint a baking cake on the front of the oven door. Even more
cunning, actually bake a cake at the same time. How about using shreaded
steel instead of rock? I assume the longer threads of steel would give a
much stronger bonding with the resin. Or you could use bite sized shreddies
for economy?
John
cunning, actually bake a cake at the same time. How about using shreaded
steel instead of rock? I assume the longer threads of steel would give a
much stronger bonding with the resin. Or you could use bite sized shreddies
for economy?
John
----- Original Message -----
From: "Tom Murray" <thomasm923@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, April 23, 2001 4:56 AM
Subject: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
> --- In CAD_CAM_EDM_DRO@y..., "Smoke" <gordonr@r...> wrote:
>
> > I looked into this once. The company I researched that does it
> > uses a mixture of silca and castable poy.
>
> Poy? Like the Hawaiian stuff? :)
>
> > the minimum "grit" size for the "silica"
> > is 1/2" diameter. After reading the info at the site, you find out
> >the "silica" is actually rocks...
>
> > The molds are custom made for each project and are EXPEN$IVE!
>
> Thanks for your input, Smoke...
> Remember, this would be a small mill. Large grit (or rather, ROCKS)
> would be out. I wouldn't want to "shake-down" a thick mass of resin
> and rubble. I'm thinking perhaps powdered stone or metal.
>
> A mold or two for a small mill wouldn't be that much trouble...
> (possible famous last words).
>
> > Another disadvantages to using resin (I've tried it) is that it
> > isn't anywhere near as strong as aluminum or steel, consequently
> > web cross sections need to be much thicker.
>
> I don't think that would be much of a problem with a small mill,
> especially if there was a metal sub-structure embedded within the
> epoxy.
>
> I haven't considered lost-wax casting. That is an interesting
> thought. Burning out the wax in my kitchen probably won't go over
> well with a certain someone, though...
>
> Tom Murray
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Tom Murray
2001-04-22 10:49:43 UTC
Cast resin for a cnc mill design - good idea?
Doug Harrison
2001-04-22 13:48:21 UTC
Re: [CAD_CAM_EDM_DRO] Cast resin for a cnc mill design - good idea?
Tom Murray
2001-04-22 15:00:22 UTC
Re: Cast resin for a cnc mill design - good idea?
Brian Pitt
2001-04-22 16:38:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Doug Harrison
2001-04-22 16:55:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Smoke
2001-04-22 19:27:25 UTC
Re: [CAD_CAM_EDM_DRO] Cast resin for a cnc mill design - good idea?
Tom Murray
2001-04-22 20:56:15 UTC
Re: Cast resin for a cnc mill design - good idea?
Jerry Kimberlin
2001-04-22 21:01:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Smoke
2001-04-22 22:44:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Smoke
2001-04-22 22:47:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
dave engvall
2001-04-22 22:53:49 UTC
Re: [CAD_CAM_EDM_DRO] Cast resin for a cnc mill design - good idea?
e.heritage@b...
2001-04-23 05:35:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
ballendo@y...
2001-04-23 06:54:13 UTC
Re: Cast resin for a cnc mill design - good idea?
Smoke
2001-04-23 07:19:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Marcus & Eva
2001-04-23 07:59:51 UTC
Re: [CAD_CAM_EDM_DRO] Cast resin for a cnc mill design - good idea?
Marcus & Eva
2001-04-23 08:33:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Smoke
2001-04-23 09:19:22 UTC
Re: [CAD_CAM_EDM_DRO] Cast resin for a cnc mill design - good idea?
Doug Harrison
2001-04-23 13:59:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Jerry Kimberlin
2001-04-23 17:44:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Tom Murray
2001-04-23 20:53:38 UTC
Re: Cast resin for a cnc mill - cutting fluid?
Tom Murray
2001-04-23 20:57:46 UTC
Re: Cast resin for a cnc mill design - good idea?
ballendo@y...
2001-04-24 04:35:03 UTC
diversity was Re: Cast resin for a cnc mill design - good idea?
Carol & Jerry Jankura
2001-04-24 05:47:59 UTC
RE: [CAD_CAM_EDM_DRO] diversity was Re: Cast resin for a cnc mill design - good idea?
Marcus & Eva
2001-04-24 08:51:14 UTC
Re: [CAD_CAM_EDM_DRO] diversity was Re: Cast resin for a cnc mill design - good idea?
Marcus & Eva
2001-04-24 09:15:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Doug Harrison
2001-04-24 15:22:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill - cutting fluid?
stratton@m...
2001-04-24 18:37:35 UTC
Re: [CAD_CAM_EDM_DRO] diversity was Re: Cast resin for a cnc mill design - good idea?
ballendo@y...
2001-04-24 19:37:46 UTC
Re: diversity
ballendo@y...
2001-04-24 19:41:36 UTC
diversity was Re: Cast resin for a cnc mill design - good idea?
dave engvall
2001-04-29 22:09:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill - cutting fluid?
dave engvall
2001-05-08 22:11:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Tim Goldstein
2001-05-08 23:36:21 UTC
DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-09 00:45:41 UTC
Re: DeskWinNC, GeckoG210, Bridgett
dougrasmussen@c...
2001-05-09 03:47:13 UTC
Re: DeskWinNC, GeckoG210, Bridgett
Tim Goldstein
2001-05-09 07:21:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
Tim Goldstein
2001-05-09 07:21:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
dave engvall
2001-05-09 08:51:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cast resin for a cnc mill design - good idea?
Tim Goldstein
2001-05-09 11:49:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
dougrasmussen@c...
2001-05-09 12:08:18 UTC
Re: DeskWinNC, GeckoG210, Bridgett
Joe Vicars
2001-05-09 12:32:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
Tim Goldstein
2001-05-09 13:13:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
Joe Vicars
2001-05-09 13:35:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
Tim Goldstein
2001-05-09 16:36:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-10 03:44:36 UTC
Re: DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-10 04:00:53 UTC
Re: DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-10 04:05:49 UTC
Re: DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-10 04:17:26 UTC
Re: DeskWinNC, GeckoG210, Bridgett
ballendo@y...
2001-05-10 04:45:42 UTC
List goals/aims/results? also Re: DeskWinNC, GeckoG210, Bridgett
torquemada40223@y...
2001-05-10 07:35:54 UTC
List goals/aims/results? also Re: DeskWinNC, GeckoG210, Bridgett
Hugh Currin
2001-05-10 07:47:29 UTC
Re: [CAD_CAM_EDM_DRO] List goals/aims/results? also Re: DeskWinNC, GeckoG210, Bridgett
Brian Pitt
2001-05-10 10:53:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett