Re: DeskWinNC, GeckoG210, Bridgett

Joe,

Dougs orig. post didn't surprise me at all (made obvious by my reply
post), as I had seen/used these numbers/machines before. I would also
like to know more about these distinctions with the old machines.
Retro-fitters?

Ballendo

--- In CAD_CAM_EDM_DRO@y..., Joe Vicars <jvicars@c...> wrote:
> Tim, I see where you are comming from. Hard to argue when it is in
black and white. I have an overwhelming urge to find out the
> reason for this. Is it a misprint or what? What BOSS series is
your machine?
> I have a BOSS 3 Series 1 manual from 1979 that shows 120 ipm
rapids, and yours was from a 1983. Doesn't make sense, but I would
> like to find out the real reason.
>
>
> Tim Goldstein wrote:
>
> > For anyone that is interested I have put a scan of the scanned
spec sheet
> > Matt Shaver sent me on the series II Bridgeport on the web. It is
at:
> > http://www.ktmarketing.com/BridgeportSpec.jpg
> > AOL users click <a
> > href="http://www.ktmarketing.com/BridgeportSpec.jpg">HERE</a>
> >
> > Warning it is a VERY big file (just under 1/2 meg) and will take
a while to
> > load.
> >
> > Tim
> > [Denver, CO]
> >
> > > -----Original Message-----
> > > Tim,
> > >
> > > Are you sure of the 25ipm rate? That's painfully slow. I'm
almost
> > > positive I've seen older unmodified BOSS machines running
faster than
> > > that. At that speed it'd be like watching trees grow.
> > >
> > > thanks,
> > >
> > > Doug
> > > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/