Re: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett

Tim, I see where you are comming from. Hard to argue when it is in black and white. I have an overwhelming urge to find out the
reason for this. Is it a misprint or what? What BOSS series is your machine?
I have a BOSS 3 Series 1 manual from 1979 that shows 120 ipm rapids, and yours was from a 1983. Doesn't make sense, but I would
like to find out the real reason.


Tim Goldstein wrote:

> For anyone that is interested I have put a scan of the scanned spec sheet
> Matt Shaver sent me on the series II Bridgeport on the web. It is at:
> http://www.ktmarketing.com/BridgeportSpec.jpg
> AOL users click <a
> href="http://www.ktmarketing.com/BridgeportSpec.jpg">HERE</a>
>
> Warning it is a VERY big file (just under 1/2 meg) and will take a while to
> load.
>
> Tim
> [Denver, CO]
>
> > -----Original Message-----
> > Tim,
> >
> > Are you sure of the 25ipm rate? That's painfully slow. I'm almost
> > positive I've seen older unmodified BOSS machines running faster than
> > that. At that speed it'd be like watching trees grow.
> >
> > thanks,
> >
> > Doug
> > FAQ: http://www.ktmarketing.com/faq.html
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/