RE: [CAD_CAM_EDM_DRO] Re: DeskWinNC, GeckoG210, Bridgett

Point well taken. I figure that the added stress of operation will be offset
by my hobby duty cycle. If the machine averages 5 hours of use a week once
it is running that will be amazing.

Tim
[Denver, C0]

> -----Original Message-----
> Tim,
>
> This is probably obvious, but just in case:
>
> Since the machine is running four times the "designed" rate, the
> maintennance recommendations, and experiences of others with the
> stock machine, will not be accurate. You don't want to wear Bridgett
> out 4 X as fast!
>
> Modern oil formulations will help, but still something to keep in
> mind...
>
> Also applies to those hi-speed sherline mill/lathe CNC's out there!
>
> Hope this helps.
>
> Ballendo
>
> FAQ: http://www.ktmarketing.com/faq.html