Re: emc
Posted by
Steve Carlisle
on 1999-10-11 09:47:45 UTC
Hoyt, you are going to have to start up your
own I-LPT news list, and then you can relate
to all the fun us guys are having in this cult.
Steve Carlisle
----------
From: batwings@...
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] emc
Date: Sunday, October 10, 1999 2:39 PM
From: batwings@...
Guys I took the advice someone offered about reading awhile and the thing
that came up is one question: If it takes a giga drive, a new OS, a lot of
fiddling around with files and directories, as it looks like it does for
everyone, then what about EMC is so desirable as to make you all endure
that? I've seen endless softwares that run under Win or DOS, use less
space, plug and chug, etc. My own inclinations are to write my stuff and
second to that would be to use something that installs simply. So what's
up?
Best wishes,
Hoyt McKagen
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
Best MC Repair - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
May you live in interesting times
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
own I-LPT news list, and then you can relate
to all the fun us guys are having in this cult.
Steve Carlisle
----------
From: batwings@...
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] emc
Date: Sunday, October 10, 1999 2:39 PM
From: batwings@...
Guys I took the advice someone offered about reading awhile and the thing
that came up is one question: If it takes a giga drive, a new OS, a lot of
fiddling around with files and directories, as it looks like it does for
everyone, then what about EMC is so desirable as to make you all endure
that? I've seen endless softwares that run under Win or DOS, use less
space, plug and chug, etc. My own inclinations are to write my stuff and
second to that would be to use something that installs simply. So what's
up?
Best wishes,
Hoyt McKagen
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
Best MC Repair - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
May you live in interesting times
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
Discussion Thread
batwings@x...
1999-10-10 21:39:43 UTC
emc
TheDragonPit
1999-10-11 08:03:15 UTC
Re: emc
Terry L. Ridder
1999-10-11 08:15:31 UTC
Re: emc
Steve Carlisle
1999-10-11 09:47:45 UTC
Re: emc
Darrell Gehlsen
1999-10-11 09:54:32 UTC
Re: emc
Carlos Guillermo
1999-10-11 11:26:20 UTC
RE: emc
Carlos Guillermo
1999-10-11 11:39:59 UTC
RE: emc
Carlos Guillermo
1999-10-11 11:44:23 UTC
RE: emc
Paul Corner
1999-10-11 12:39:37 UTC
Re: emc
Terry L. Ridder
1999-10-11 12:41:40 UTC
Re: emc
Terry L. Ridder
1999-10-11 13:05:07 UTC
RE: emc
Steve Carlisle
1999-10-11 14:27:59 UTC
Re: emc
Steve Carlisle
1999-10-11 14:30:47 UTC
Re: emc
Jon Elson
1999-10-11 13:48:46 UTC
Re: emc
Matt Shaver
1999-10-11 15:57:50 UTC
Re: emc
Ian Wright
1999-10-11 12:29:06 UTC
Re: emc
Carlos Guillermo
1999-10-12 04:19:28 UTC
RE: emc
batwings@x...
1999-10-11 20:53:46 UTC
Re: emc
batwings@x...
1999-10-11 10:04:00 UTC
Re: emc
Darrell Gehlsen
1999-10-12 10:15:37 UTC
Re: emc
Roger Brower
1999-10-13 13:51:58 UTC
emc
Les Watts
2002-07-17 06:24:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: emc
Ian W. Wright
2002-07-17 06:56:24 UTC
Re: [CAD_CAM_EDM_DRO] emc
bjammin@i...
2002-07-17 08:02:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: emc
bjammin@i...
2002-07-17 08:03:41 UTC
Re: [CAD_CAM_EDM_DRO] emc
William Scalione
2002-07-17 09:20:11 UTC
Re: [CAD_CAM_EDM_DRO] emc
Keith Bowers
2002-07-17 11:16:04 UTC
Re: [CAD_CAM_EDM_DRO] emc
Ray Henry
2002-07-17 12:40:06 UTC
Re: Re: Re: emc
Keith Rumley
2002-07-17 14:30:42 UTC
Re: [CAD_CAM_EDM_DRO] emc
dakota8833
2002-07-17 15:05:13 UTC
Re: emc
Marshall Pharoah
2002-07-17 19:30:31 UTC
RE: [CAD_CAM_EDM_DRO] emc
Carol & Jerry Jankura
2002-07-17 20:17:09 UTC
RE: [CAD_CAM_EDM_DRO] emc
Les Newell
2002-07-17 23:59:54 UTC
Re: [CAD_CAM_EDM_DRO] emc
Ray Henry
2002-07-18 06:46:26 UTC
Re: Re: emc
Joll503@A...
2002-07-19 02:20:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: emc
Jon Elson
2002-07-19 09:11:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: emc
bjammin@i...
2002-07-22 06:59:02 UTC
Re: [CAD_CAM_EDM_DRO] emc
bjammin@i...
2002-07-25 06:59:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: emc
bjammin@i...
2002-07-25 06:59:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: emc
edward c heil
2003-06-11 16:21:50 UTC
emc
Jon Elson
2003-06-11 21:40:21 UTC
Re: [CAD_CAM_EDM_DRO] emc