CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] emc

on 2002-07-17 09:20:11 UTC
> The floppy works as a floppy should, and I can and have set boot options
> every way they can be set.
>
> >First check your BIOS setup again. IF that seems OK and one of the boot
> >options is definitely 'floppy', then go to www.bootdisk.com and download
> >yourself a new boot floppy image of dos 6.22
>
> I already have a boot disc in DOS6.22 that works on other machines and not
> this one.
>
> Regards, Hoyt
>

Hoyt,

If you have your bios set to boot from floppy, and the disk is good, then the
reason it won't boot is NOT because you have linux on the hard drive.

Does the floppy drive light light up as if it is trying to read on boot?

Bill

Discussion Thread

batwings@x... 1999-10-10 21:39:43 UTC emc TheDragonPit 1999-10-11 08:03:15 UTC Re: emc Terry L. Ridder 1999-10-11 08:15:31 UTC Re: emc Steve Carlisle 1999-10-11 09:47:45 UTC Re: emc Darrell Gehlsen 1999-10-11 09:54:32 UTC Re: emc Carlos Guillermo 1999-10-11 11:26:20 UTC RE: emc Carlos Guillermo 1999-10-11 11:39:59 UTC RE: emc Carlos Guillermo 1999-10-11 11:44:23 UTC RE: emc Paul Corner 1999-10-11 12:39:37 UTC Re: emc Terry L. Ridder 1999-10-11 12:41:40 UTC Re: emc Terry L. Ridder 1999-10-11 13:05:07 UTC RE: emc Steve Carlisle 1999-10-11 14:27:59 UTC Re: emc Steve Carlisle 1999-10-11 14:30:47 UTC Re: emc Jon Elson 1999-10-11 13:48:46 UTC Re: emc Matt Shaver 1999-10-11 15:57:50 UTC Re: emc Ian Wright 1999-10-11 12:29:06 UTC Re: emc Carlos Guillermo 1999-10-12 04:19:28 UTC RE: emc batwings@x... 1999-10-11 20:53:46 UTC Re: emc batwings@x... 1999-10-11 10:04:00 UTC Re: emc Darrell Gehlsen 1999-10-12 10:15:37 UTC Re: emc Roger Brower 1999-10-13 13:51:58 UTC emc Les Watts 2002-07-17 06:24:11 UTC Re: [CAD_CAM_EDM_DRO] Re: emc Ian W. Wright 2002-07-17 06:56:24 UTC Re: [CAD_CAM_EDM_DRO] emc bjammin@i... 2002-07-17 08:02:23 UTC Re: [CAD_CAM_EDM_DRO] Re: emc bjammin@i... 2002-07-17 08:03:41 UTC Re: [CAD_CAM_EDM_DRO] emc William Scalione 2002-07-17 09:20:11 UTC Re: [CAD_CAM_EDM_DRO] emc Keith Bowers 2002-07-17 11:16:04 UTC Re: [CAD_CAM_EDM_DRO] emc Ray Henry 2002-07-17 12:40:06 UTC Re: Re: Re: emc Keith Rumley 2002-07-17 14:30:42 UTC Re: [CAD_CAM_EDM_DRO] emc dakota8833 2002-07-17 15:05:13 UTC Re: emc Marshall Pharoah 2002-07-17 19:30:31 UTC RE: [CAD_CAM_EDM_DRO] emc Carol & Jerry Jankura 2002-07-17 20:17:09 UTC RE: [CAD_CAM_EDM_DRO] emc Les Newell 2002-07-17 23:59:54 UTC Re: [CAD_CAM_EDM_DRO] emc Ray Henry 2002-07-18 06:46:26 UTC Re: Re: emc Joll503@A... 2002-07-19 02:20:58 UTC Re: [CAD_CAM_EDM_DRO] Re: emc Jon Elson 2002-07-19 09:11:58 UTC Re: [CAD_CAM_EDM_DRO] Re: emc bjammin@i... 2002-07-22 06:59:02 UTC Re: [CAD_CAM_EDM_DRO] emc bjammin@i... 2002-07-25 06:59:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: emc bjammin@i... 2002-07-25 06:59:09 UTC Re: [CAD_CAM_EDM_DRO] Re: emc edward c heil 2003-06-11 16:21:50 UTC emc Jon Elson 2003-06-11 21:40:21 UTC Re: [CAD_CAM_EDM_DRO] emc