Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Posted by
alex
on 2003-01-21 07:50:53 UTC
Hi, just want to point out that Linux is not a real time OS,
though it has an excellent system calls for the C programming.
Its a very good OS, but requires RT extension for a real time work
( I have to yet figure it out).
In this respect I wonder if somebody ported EMC to Dos.
Alex
though it has an excellent system calls for the C programming.
Its a very good OS, but requires RT extension for a real time work
( I have to yet figure it out).
In this respect I wonder if somebody ported EMC to Dos.
Alex
----- Original Message -----
From: <dpeter@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, January 20, 2003 11:15 PM
Subject: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> I haven't gone hacking into EMC yet, but has anyone tried to port
> it to windows? I normally work in VB and VC++ and as of yet not
> played in Linux and haven't even seen a Unix box in 15 years.
> What peaked my interest was a previous post that mentioned
> IO_base_address. If it works off the I/O address, it should talk
> directly to an ISA card just like the parallel port. I have ISA
> controller cards, but no developable software so I'm reverse
> engineering them to write code. If I can pull g-code conversion from
> another piece of software rather than doing it from scratch...
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: pentam@... indigo_red@... timg@...
[Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
zestronad54529 <dpeter@n...
2003-01-20 20:15:27 UTC
EMC, ISA and other Questions...
Ivan Nichols <ouisel@v...
2003-01-21 05:12:00 UTC
Re: EMC, ISA and other Questions...
Dave Lantz
2003-01-21 05:17:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
Carol & Jerry Jankura
2003-01-21 05:53:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
Vince Negrete
2003-01-21 07:44:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
alex
2003-01-21 07:50:53 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-21 08:15:56 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
alex
2003-01-21 08:23:48 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Vince Negrete
2003-01-21 08:27:57 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-21 08:36:48 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
alex
2003-01-21 08:50:25 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Vince Negrete
2003-01-21 08:54:20 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-21 09:03:23 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Tim Goldstein
2003-01-21 09:14:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
j.guenther
2003-01-21 09:18:15 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
alex
2003-01-21 09:18:44 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Jon Elson
2003-01-21 09:21:18 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Jon Elson
2003-01-21 09:28:01 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-21 09:39:00 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
alex
2003-01-21 09:52:47 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Carol & Jerry Jankura
2003-01-21 10:44:26 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Carol & Jerry Jankura
2003-01-21 10:44:30 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
alex
2003-01-21 11:12:33 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Ray Henry
2003-01-21 13:44:43 UTC
Re: EMC, ISA and other Questions...
jmkasunich <jmkasunich@y...
2003-01-21 14:53:28 UTC
PLEASE TRIM POSTS!! was Re: EMC, ISA and other Questions...
Ray Henry
2003-01-21 17:10:00 UTC
Re: Re: EMC, ISA and other Questions...
Ray Henry
2003-01-21 17:10:03 UTC
Re: Re: EMC, ISA and other Questions...
Jon Elson
2003-01-21 23:16:20 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Jon Elson
2003-01-21 23:18:01 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Tim Goldstein
2003-01-21 23:27:54 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Matt Shaver
2003-01-22 03:08:26 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Jon Elson
2003-01-22 09:34:43 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Tim Goldstein
2003-01-22 09:54:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
alex
2003-01-22 10:13:54 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-22 10:35:26 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Art
2003-01-22 13:50:45 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
j.guenther
2003-01-22 14:07:56 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Dan Statman
2003-01-22 14:34:36 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Art
2003-01-22 15:50:20 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Art
2003-01-22 15:58:39 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Bob Simon
2003-01-22 16:53:36 UTC
RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
Art
2003-01-22 16:59:15 UTC
Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
ballendo <ballendo@y...
2003-01-23 01:55:26 UTC
Re: EMC, ISA and other Questions...
ballendo <ballendo@y...
2003-01-23 02:28:13 UTC
EMC DOS source code was Re: EMC, ISA and other Questions...
ballendo <ballendo@y...
2003-01-23 02:45:59 UTC
Re: EMC, ISA and other Questions...
ballendo <ballendo@y...
2003-01-23 02:55:25 UTC
Of interpreters and controllers was Re: EMC, ISA and other Questions...
ballendo <ballendo@y...
2003-01-23 04:16:19 UTC
ABC axis stuff was Re: EMC, ISA and other Questions...
rainnea <rainnea@b...
2003-01-23 06:21:31 UTC
Re: EMC, ISA and other Questions... - 4th axis angular feedrates
IMService
2003-01-23 07:30:53 UTC
Re: RE: EMC, ISA and other Questions...
torsten98001 <torsten@g...
2003-01-23 13:00:20 UTC
ABC axis stuff was Re: EMC, ISA and other Questions...
Matt Shaver
2003-01-23 23:12:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
Art
2003-01-24 13:06:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions...
Ray Henry
2003-01-25 13:33:18 UTC
Re: Re: Re: EMC, ISA and other Questions...
alex
2003-03-11 15:23:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
Paul
2003-03-11 15:40:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
alex
2003-03-11 15:52:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
Jon Elson
2003-03-11 22:25:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
Ray Henry
2003-03-12 06:41:41 UTC
Re: Re: Re: Re: EMC, ISA and other Questions...
alex
2003-03-12 07:51:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
alex
2003-03-12 08:20:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: EMC, ISA and other Questions...
alex
2003-03-12 14:56:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
Paul
2003-03-12 15:20:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...
alex
2003-03-12 15:25:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...