Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...

Ok, started to understand - better late then never.
Interpreter reads the G-code and translates it into the commands to be
executed by the
machine. Commands are parsed into C routines which control axes of the
machine.
Please correct me if I'm wrong.
Regards, Alex

----- Original Message -----
From: j.guenther <j.guenther@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, January 21, 2003 12:03 PM
Subject: RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...


> The rs274ngc interpreter reads a gcode file and converts it to canonical
> machining functions for use in generating the appropriate motion control
> signals. It is fully documented and supports most g and m codes.
>
> John Guenther
> 'Ye Olde Pen Maker'
> Sterling, Virginia
>
> > -----Original Message-----
> > From: alex [mailto:telecomt@...]
> > Sent: Tuesday, January 21, 2003 11:29 AM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> >
> >
> > Can you please give a link for the above interpreters?
> > Can you please explain what these interpretes do?
> > Regards, Alex
> > ----- Original Message -----
> > From: j.guenther <j.guenther@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Tuesday, January 21, 2003 11:36 AM
> > Subject: RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> >
> >
> > > Alex,
> > >
> > > You can download the EMC source from SourceForge and port it
> > yourself. I
> > > built the interpreter for dos and it worked just fine. Several of the
> > > control programs available under windows / dos use the interpreter
from
> > EMC.
> > >
> > > John Guenther
> > > 'Ye Olde Pen Maker'
> > > Sterling, Virginia
> > >
> > > > -----Original Message-----
> > > > From: alex [mailto:telecomt@...]
> > > > Sent: Tuesday, January 21, 2003 11:03 AM
> > > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > > >
> > > >
> > > > Thank you , John, but I was looking for a C source code compilable
in
> > > > Borland.
> > > > Linux is great, but there are some advantages in DOS too...
> > > > Alex
> > > > ----- Original Message -----
> > > > From: j.guenther <j.guenther@...>
> > > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > > Sent: Tuesday, January 21, 2003 11:15 AM
> > > > Subject: RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > > >
> > > >
> > > > > yes EMC has been ported to dos, it is called Deskncrt and it is
> > > > available
> > > > > from www.deskam.com/download.html and is the third item on the
list.
> > It
> > > > is
> > > > > not the most recent version of EMC but it does a passable job.
> > > > If you get
> > > > > the BDI (Braid Dead Install) version of EMC, from Ray Henry or
> > > > others that
> > > > > distribute it, you can have EMC up and running in under 30 minutes
> > with
> > > > not
> > > > > hassle what so ever. This is the best way to get EMC up
> > and running,
> > > > IMHO,
> > > > > and Paul Corner deserves a great deal of thanks for making this
> > happen.
> > > > >
> > > > > John Guenther
> > > > > 'Ye Olde Pen Maker'
> > > > > Sterling, Virginia
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: alex [mailto:telecomt@...]
> > > > > > Sent: Tuesday, January 21, 2003 10:30 AM
> > > > > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > > > Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > > > > >
> > > > > >
> > > > > > Hi, just want to point out that Linux is not a real time OS,
> > > > > > though it has an excellent system calls for the C programming.
> > > > > > Its a very good OS, but requires RT extension for a real time
work
> > > > > > ( I have to yet figure it out).
> > > > > > In this respect I wonder if somebody ported EMC to Dos.
> > > > > > Alex
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: <dpeter@...>
> > > > > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > > > > Sent: Monday, January 20, 2003 11:15 PM
> > > > > > Subject: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > > > > >
> > > > > >
> > > > > > > I haven't gone hacking into EMC yet, but has anyone
> > > > tried to port
> > > > > > > it to windows? I normally work in VB and VC++ and as of yet
not
> > > > > > > played in Linux and haven't even seen a Unix box in 15 years.
> > > > > > > What peaked my interest was a previous post that mentioned
> > > > > > > IO_base_address. If it works off the I/O address, it
> > should talk
> > > > > > > directly to an ISA card just like the parallel port. I have
ISA
> > > > > > > controller cards, but no developable software so I'm reverse
> > > > > > > engineering them to write code. If I can pull g-code
> > > > conversion from
> > > > > > > another piece of software rather than doing it from scratch...
> > > > > > >
> > > > > > >
> > > > > > > Addresses:
> > > > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > > > >
> > > > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > > wanliker@...
> > > > > > > Moderator: pentam@... indigo_red@...
> > > > timg@...
> > > > > > [Moderator]
> > > > > > > URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > > > >
> > > > > > > OFF Topic POSTS: General Machining
> > > > > > > If you wish to post on unlimited OT subjects goto:
> > > > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > > > > reach it if
> > > > > > you have trouble.
> > > > > > > http://www.metalworking.com/news_servers.html
> > > > > > >
> > > > > > > http://groups.yahoo.com/group/jobshophomeshop I consider
> > > > this to be
> > > > a
> > > > > > sister site to the CCED group, as many of the same members are
> > > > > > there, for OT
> > > > > > subjects, that are not allowed on the CCED list.
> > > > > > >
> > > > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN
> > BY POSTING
> > > > THEM.
> > > > > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > > > > bill
> > > > > > > List Mom
> > > > > > > List Owner
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > > > >
> > > > > >
> > > > > >
> > > > > > Addresses:
> > > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > > >
> > > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@...
> > > > > > Moderator: pentam@... indigo_red@...
> > > > > > timg@... [Moderator]
> > > > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > > >
> > > > > > OFF Topic POSTS: General Machining
> > > > > > If you wish to post on unlimited OT subjects goto:
> > > > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > > > > reach it if you have trouble.
> > > > > > http://www.metalworking.com/news_servers.html
> > > > > >
> > > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > > > > to be a sister site to the CCED group, as many of the same
> > > > > > members are there, for OT subjects, that are not allowed
> > on the CCED
> > > > list.
> > > > > >
> > > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > > > > > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > > > > > EXCEPTIONS........
> > > > > > bill
> > > > > > List Mom
> > > > > > List Owner
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > Addresses:
> > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > >
> > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@...
> > > > > Moderator: pentam@... indigo_red@...
> > timg@...
> > > > [Moderator]
> > > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > >
> > > > > OFF Topic POSTS: General Machining
> > > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > > reach it if
> > > > you have trouble.
> > > > > http://www.metalworking.com/news_servers.html
> > > > >
> > > > > http://groups.yahoo.com/group/jobshophomeshop I consider
> > this to be
> > a
> > > > sister site to the CCED group, as many of the same members are
> > > > there, for OT
> > > > subjects, that are not allowed on the CCED list.
> > > > >
> > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > THEM.
> > > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > > bill
> > > > > List Mom
> > > > > List Owner
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: pentam@... indigo_red@...
timg@...
> > > [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it
> > if
> > > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> > > sister site to the CCED group, as many of the same members are
> > there, for
> > OT
> > > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: pentam@... indigo_red@...
timg@...
> > [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> > sister site to the CCED group, as many of the same members are
> > there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: pentam@... indigo_red@... timg@...
> [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: pentam@... indigo_red@... timg@...
[Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>