CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...

Posted by j.guenther
on 2003-01-21 09:39:00 UTC
Jon,

Well, I stand corrected. It has however been reported on this list in the
past that DeskNCRT is a DOS port of EMC. Personally I have tried it
(DeskNCRT) and don't like it but I suppose that is my problem. I would
really like to be able to use EMC for all of my machining but since the
angular axis doesn't seem to work correctly I have been moving away from
EMC.

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: Jon Elson [mailto:elson@...]
> Sent: Tuesday, January 21, 2003 12:23 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
>
>
>
>
> j.guenther wrote:
>
> >yes EMC has been ported to dos, it is called Deskncrt and it is available
> >from www.deskam.com/download.html and is the third item on the
> list. It is
> >not the most recent version of EMC but it does a passable job.
> If you get
> >the BDI (Braid Dead Install) version of EMC, from Ray Henry or
> others that
> >distribute it, you can have EMC up and running in under 30
> minutes with not
> >hassle what so ever. This is the best way to get EMC up and
> running, IMHO,
> >and Paul Corner deserves a great deal of thanks for making this happen.
> >
> >
> This is NOT EMC. It uses the G-code interpreter, and maybe some of the
> motion planning from
> EMC. But, it does not use the motion control or screen GUI from EMC.
> It should really be
> considered a separate product, although related. The 'flavor' of g-code
> they take would be
> expected to be the same, though. Still, it may do exactly what you
> want, but it is NOT open
> source. So, you can't develop your own I/O devices for it like you can
> with EMC.
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: pentam@... indigo_red@...
> timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

zestronad54529 <dpeter@n... 2003-01-20 20:15:27 UTC EMC, ISA and other Questions... Ivan Nichols <ouisel@v... 2003-01-21 05:12:00 UTC Re: EMC, ISA and other Questions... Dave Lantz 2003-01-21 05:17:38 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 05:53:07 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Vince Negrete 2003-01-21 07:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... alex 2003-01-21 07:50:53 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 08:15:56 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 08:23:48 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Vince Negrete 2003-01-21 08:27:57 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 08:36:48 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 08:50:25 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Vince Negrete 2003-01-21 08:54:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 09:03:23 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-21 09:14:34 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... j.guenther 2003-01-21 09:18:15 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... alex 2003-01-21 09:18:44 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 09:21:18 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 09:28:01 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 09:39:00 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 09:52:47 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 10:44:26 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 10:44:30 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 11:12:33 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Ray Henry 2003-01-21 13:44:43 UTC Re: EMC, ISA and other Questions... jmkasunich <jmkasunich@y... 2003-01-21 14:53:28 UTC PLEASE TRIM POSTS!! was Re: EMC, ISA and other Questions... Ray Henry 2003-01-21 17:10:00 UTC Re: Re: EMC, ISA and other Questions... Ray Henry 2003-01-21 17:10:03 UTC Re: Re: EMC, ISA and other Questions... Jon Elson 2003-01-21 23:16:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 23:18:01 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-21 23:27:54 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Matt Shaver 2003-01-22 03:08:26 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-22 09:34:43 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-22 09:54:03 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-22 10:13:54 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-22 10:35:26 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 13:50:45 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-22 14:07:56 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Dan Statman 2003-01-22 14:34:36 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 15:50:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 15:58:39 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Bob Simon 2003-01-22 16:53:36 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 16:59:15 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 01:55:26 UTC Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:28:13 UTC EMC DOS source code was Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:45:59 UTC Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:55:25 UTC Of interpreters and controllers was Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 04:16:19 UTC ABC axis stuff was Re: EMC, ISA and other Questions... rainnea <rainnea@b... 2003-01-23 06:21:31 UTC Re: EMC, ISA and other Questions... - 4th axis angular feedrates IMService 2003-01-23 07:30:53 UTC Re: RE: EMC, ISA and other Questions... torsten98001 <torsten@g... 2003-01-23 13:00:20 UTC ABC axis stuff was Re: EMC, ISA and other Questions... Matt Shaver 2003-01-23 23:12:56 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Art 2003-01-24 13:06:55 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Ray Henry 2003-01-25 13:33:18 UTC Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-11 15:23:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Paul 2003-03-11 15:40:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-11 15:52:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Jon Elson 2003-03-11 22:25:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Ray Henry 2003-03-12 06:41:41 UTC Re: Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-12 07:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-12 08:20:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-12 14:56:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Paul 2003-03-12 15:20:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-12 15:25:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...