Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...

----- Original Message -----
From: Paul <no.spam27@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 11, 2003 6:12 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...


>
> Hi Alex
>
> Running the various parts of EMC on a distributed system is very easy to
do.
> All the network and communication protocols are handled by low level
> libraries and drivers. All you need to do is to decide which node (or
> computer) runs each process and configure the emc.nml file to suit.
> Making sure the network and any file sharing protocols are all working
first.
>
> For more info on this, I'd suggest reading the "Remote GUI" section of the
> EMC Handbook for an introduction.
>
> Please note: Reading the encoders on one node and controlling the motors
on
> another is not practical at present.
>
> Regards, Paul.
>
>
>
> On Tuesday 11 March 2003 10:59 pm, alex wrote:
> > Going further, this "old" computer or SBC, can have DRO card and at the
> > same time it can control steppers/servos in a closed loop. Being
networked
> > to a "main" computer running Linux/EMC it can get "macro" commands based
> > on a postprocessor results.
>
> --
>
> The spamming scumbags have won - A new email account is now in use with a
> mangled return address. Send replies to :
> paul AT bdiemc DOT fslife DOT co DOT uk
> Or :
> bdi-emc AT ntlworld DOT com
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>