CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...

Posted by j.guenther
on 2003-01-21 08:36:48 UTC
Alex,

You can download the EMC source from SourceForge and port it yourself. I
built the interpreter for dos and it worked just fine. Several of the
control programs available under windows / dos use the interpreter from EMC.

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: alex [mailto:telecomt@...]
> Sent: Tuesday, January 21, 2003 11:03 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
>
>
> Thank you , John, but I was looking for a C source code compilable in
> Borland.
> Linux is great, but there are some advantages in DOS too...
> Alex
> ----- Original Message -----
> From: j.guenther <j.guenther@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, January 21, 2003 11:15 AM
> Subject: RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
>
>
> > yes EMC has been ported to dos, it is called Deskncrt and it is
> available
> > from www.deskam.com/download.html and is the third item on the list. It
> is
> > not the most recent version of EMC but it does a passable job.
> If you get
> > the BDI (Braid Dead Install) version of EMC, from Ray Henry or
> others that
> > distribute it, you can have EMC up and running in under 30 minutes with
> not
> > hassle what so ever. This is the best way to get EMC up and running,
> IMHO,
> > and Paul Corner deserves a great deal of thanks for making this happen.
> >
> > John Guenther
> > 'Ye Olde Pen Maker'
> > Sterling, Virginia
> >
> > > -----Original Message-----
> > > From: alex [mailto:telecomt@...]
> > > Sent: Tuesday, January 21, 2003 10:30 AM
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > >
> > >
> > > Hi, just want to point out that Linux is not a real time OS,
> > > though it has an excellent system calls for the C programming.
> > > Its a very good OS, but requires RT extension for a real time work
> > > ( I have to yet figure it out).
> > > In this respect I wonder if somebody ported EMC to Dos.
> > > Alex
> > >
> > > ----- Original Message -----
> > > From: <dpeter@...>
> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > Sent: Monday, January 20, 2003 11:15 PM
> > > Subject: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions...
> > >
> > >
> > > > I haven't gone hacking into EMC yet, but has anyone
> tried to port
> > > > it to windows? I normally work in VB and VC++ and as of yet not
> > > > played in Linux and haven't even seen a Unix box in 15 years.
> > > > What peaked my interest was a previous post that mentioned
> > > > IO_base_address. If it works off the I/O address, it should talk
> > > > directly to an ISA card just like the parallel port. I have ISA
> > > > controller cards, but no developable software so I'm reverse
> > > > engineering them to write code. If I can pull g-code
> conversion from
> > > > another piece of software rather than doing it from scratch...
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@...
> > > > Moderator: pentam@... indigo_red@...
> timg@...
> > > [Moderator]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > reach it if
> > > you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be
> a
> > > sister site to the CCED group, as many of the same members are
> > > there, for OT
> > > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: pentam@... indigo_red@...
> > > timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > reach it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > to be a sister site to the CCED group, as many of the same
> > > members are there, for OT subjects, that are not allowed on the CCED
> list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > > EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: pentam@... indigo_red@... timg@...
> [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are
> there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: pentam@... indigo_red@... timg@...
[Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

zestronad54529 <dpeter@n... 2003-01-20 20:15:27 UTC EMC, ISA and other Questions... Ivan Nichols <ouisel@v... 2003-01-21 05:12:00 UTC Re: EMC, ISA and other Questions... Dave Lantz 2003-01-21 05:17:38 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 05:53:07 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Vince Negrete 2003-01-21 07:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... alex 2003-01-21 07:50:53 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 08:15:56 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 08:23:48 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Vince Negrete 2003-01-21 08:27:57 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 08:36:48 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 08:50:25 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Vince Negrete 2003-01-21 08:54:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 09:03:23 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-21 09:14:34 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... j.guenther 2003-01-21 09:18:15 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... alex 2003-01-21 09:18:44 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 09:21:18 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 09:28:01 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-21 09:39:00 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 09:52:47 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 10:44:26 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Carol & Jerry Jankura 2003-01-21 10:44:30 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-21 11:12:33 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Ray Henry 2003-01-21 13:44:43 UTC Re: EMC, ISA and other Questions... jmkasunich <jmkasunich@y... 2003-01-21 14:53:28 UTC PLEASE TRIM POSTS!! was Re: EMC, ISA and other Questions... Ray Henry 2003-01-21 17:10:00 UTC Re: Re: EMC, ISA and other Questions... Ray Henry 2003-01-21 17:10:03 UTC Re: Re: EMC, ISA and other Questions... Jon Elson 2003-01-21 23:16:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-21 23:18:01 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-21 23:27:54 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Matt Shaver 2003-01-22 03:08:26 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Jon Elson 2003-01-22 09:34:43 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Tim Goldstein 2003-01-22 09:54:03 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... alex 2003-01-22 10:13:54 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-22 10:35:26 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 13:50:45 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... j.guenther 2003-01-22 14:07:56 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Dan Statman 2003-01-22 14:34:36 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 15:50:20 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 15:58:39 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Bob Simon 2003-01-22 16:53:36 UTC RE: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... Art 2003-01-22 16:59:15 UTC Re: [CAD_CAM_EDM_DRO] EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 01:55:26 UTC Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:28:13 UTC EMC DOS source code was Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:45:59 UTC Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 02:55:25 UTC Of interpreters and controllers was Re: EMC, ISA and other Questions... ballendo <ballendo@y... 2003-01-23 04:16:19 UTC ABC axis stuff was Re: EMC, ISA and other Questions... rainnea <rainnea@b... 2003-01-23 06:21:31 UTC Re: EMC, ISA and other Questions... - 4th axis angular feedrates IMService 2003-01-23 07:30:53 UTC Re: RE: EMC, ISA and other Questions... torsten98001 <torsten@g... 2003-01-23 13:00:20 UTC ABC axis stuff was Re: EMC, ISA and other Questions... Matt Shaver 2003-01-23 23:12:56 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Art 2003-01-24 13:06:55 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC, ISA and other Questions... Ray Henry 2003-01-25 13:33:18 UTC Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-11 15:23:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Paul 2003-03-11 15:40:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-11 15:52:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Jon Elson 2003-03-11 22:25:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Ray Henry 2003-03-12 06:41:41 UTC Re: Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-12 07:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-12 08:20:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: EMC, ISA and other Questions... alex 2003-03-12 14:56:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... Paul 2003-03-12 15:20:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions... alex 2003-03-12 15:25:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: EMC, ISA and other Questions...