CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Air blower?

Posted by josef wagner
on 2004-09-26 23:02:39 UTC
good morning from vienna
pls excuse my rather poor english but i hope i am able to point out
the problems with mill maschine cleaning:
first the problem must be solved considering the mill speed (circumferental)
and the weight of chips.
blowing away would surely not work. the result is that you have a resultant
speed
that varies for each chip around the tool. thus the pieces will fly away in
any direction.
the only one solution is to make a suctions (vacuum cleaning) system.
of coarse you might be faced with sound problem. and attenuation is really
mendatory
for bigger units. but there is a way to make a correct design for air
silencers with special
designed wafers and centers not to be worn out by the dust.
check the italien home page coralspa.it
others i do know here in europe and i was convinced of the perfect work is
from
german cfg works.
best greetings from vienna, austria
josef wagner
+++

----- Original Message -----
From: "Bill Robertson" <billrobertson42@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 27, 2004 5:03 AM
Subject: [CAD_CAM_EDM_DRO] Air blower?


> Any suggestions on what to use to blow the chips out of the way in a
> vertical milling machine?
>
> Ideal qualities (other than "it works") would be cheap and not too loud.
>
> Thanks.
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

Bill Robertson 2004-09-26 21:47:18 UTC Air blower? josef wagner 2004-09-26 23:02:39 UTC Re: [CAD_CAM_EDM_DRO] Air blower? R Rogers 2004-09-26 23:03:44 UTC Re: [CAD_CAM_EDM_DRO] Air blower? Tony Jeffree 2004-09-26 23:28:12 UTC Re: [CAD_CAM_EDM_DRO] Air blower? Bill Robertson 2004-09-27 06:26:33 UTC Re: Air blower? turbulatordude 2004-09-27 06:37:48 UTC Re: Air blower? R Rogers 2004-09-27 06:56:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Air blower? R Rogers 2004-09-27 06:59:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Air blower? Bill Robertson 2004-09-27 07:05:25 UTC Re: Air blower? R Rogers 2004-09-27 07:30:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Air blower? Jon Elson 2004-09-27 17:16:29 UTC Re: [CAD_CAM_EDM_DRO] Air blower? alex 2004-10-17 14:44:15 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Bruce Craig 2004-10-17 17:40:26 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-17 17:49:15 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet alex 2004-10-18 07:30:16 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet alex 2004-10-18 07:38:26 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet turbulatordude 2004-10-18 09:06:04 UTC Re: water jet alex 2004-10-18 09:26:42 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Bruce Craig 2004-10-18 09:28:58 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-18 09:51:05 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet John Cox 2004-10-18 10:16:55 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet alex 2004-10-18 10:21:01 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet caudlet 2004-10-18 10:33:07 UTC Re: water jet ftomazz 2004-10-18 10:56:55 UTC Re: water jet R Rogers 2004-10-18 11:52:11 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Bruce Craig 2004-10-18 14:38:36 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-18 15:44:09 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-18 16:27:37 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Bruce Craig 2004-10-18 16:44:57 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Bob McKnight 2004-10-18 17:55:20 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-18 18:02:46 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Jon Elson 2004-10-18 18:38:09 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet metlmunchr 2004-10-18 19:13:51 UTC Re: water jet josef wagner 2004-10-19 01:36:47 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet alex 2004-10-19 07:04:11 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet turbulatordude 2004-10-19 09:08:16 UTC Re: water jet josef wagner 2004-10-19 09:08:52 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet alex 2004-10-19 09:16:21 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-19 10:28:31 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet Mark Stacey 2004-10-19 14:21:12 UTC Re: water jet alex 2004-10-19 14:42:52 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet R Rogers 2004-10-19 16:22:32 UTC Re: [CAD_CAM_EDM_DRO] Re: water jet