Re: [CAD_CAM_EDM_DRO] Re: water jet
Posted by
John Cox
on 2004-10-18 10:16:55 UTC
i don't know if 10,000 psi will cut much of anything unless its pretty soft.
we have a flowjet water jet machine where i work and the operating pressure
at the nozzle is 60,000 psi. with just water you can cut thru a piece of
rubber 1" thick at about 50 1"pm and for metals even with abrasives its
pretty slow.
we have a flowjet water jet machine where i work and the operating pressure
at the nozzle is 60,000 psi. with just water you can cut thru a piece of
rubber 1" thick at about 50 1"pm and for metals even with abrasives its
pretty slow.
----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, October 18, 2004 11:05 AM
Subject: [CAD_CAM_EDM_DRO] Re: water jet
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, alex <telecom@i...> wrote:
>> Bruce,
>> this is exactly I had in mind.
>> But want to point out, that once you release the hydraulic
> pressure ,
>> the cutting stops,
>> so this can be controlled as well.
>> First step would be just to modify existing 10,000 psi hydraulic
>> cylinder, just by inserting orifice at the end.
>> Try it at 10,000psi with oil. Then add a bit of fine abrasive into
> oil -
>
> I assume you mean add a bit of abrasive into the oil after it leaves
> the cylinder....
>
> It would seem to me that with a 10k psi hydraulic cylinder and a
> lever connected to a 30k psi water chamber, you could use water.
>
> I have not been able to find the gpm of water use. I'm too lazy to
> calculate the rate of flow with a 10 mill nozel, but it would see
> that hang time, my term for the cutting time would mean a start, then
> a fast table move to get the cut.
>
> Interesting idea.
>
> Dave
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Discussion Thread
Bill Robertson
2004-09-26 21:47:18 UTC
Air blower?
josef wagner
2004-09-26 23:02:39 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
R Rogers
2004-09-26 23:03:44 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
Tony Jeffree
2004-09-26 23:28:12 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
Bill Robertson
2004-09-27 06:26:33 UTC
Re: Air blower?
turbulatordude
2004-09-27 06:37:48 UTC
Re: Air blower?
R Rogers
2004-09-27 06:56:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
R Rogers
2004-09-27 06:59:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
Bill Robertson
2004-09-27 07:05:25 UTC
Re: Air blower?
R Rogers
2004-09-27 07:30:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
Jon Elson
2004-09-27 17:16:29 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
alex
2004-10-17 14:44:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-17 17:40:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-17 17:49:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 07:30:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 07:38:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
turbulatordude
2004-10-18 09:06:04 UTC
Re: water jet
alex
2004-10-18 09:26:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 09:28:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 09:51:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
John Cox
2004-10-18 10:16:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 10:21:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
caudlet
2004-10-18 10:33:07 UTC
Re: water jet
ftomazz
2004-10-18 10:56:55 UTC
Re: water jet
R Rogers
2004-10-18 11:52:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 14:38:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 15:44:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 16:27:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 16:44:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bob McKnight
2004-10-18 17:55:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 18:02:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Jon Elson
2004-10-18 18:38:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
metlmunchr
2004-10-18 19:13:51 UTC
Re: water jet
josef wagner
2004-10-19 01:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-19 07:04:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
turbulatordude
2004-10-19 09:08:16 UTC
Re: water jet
josef wagner
2004-10-19 09:08:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-19 09:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-19 10:28:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Mark Stacey
2004-10-19 14:21:12 UTC
Re: water jet
alex
2004-10-19 14:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-19 16:22:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet