Re: [CAD_CAM_EDM_DRO] Re: water jet
Posted by
alex
on 2004-10-17 14:44:15 UTC
Recently was a discussion re: water jet - as Dave pointed out, X-Y is
not a problem, the problem is a water jet.
In this respect why not to make a pressure cylinder, instead of a high
pressure pump, which could supply necessary pressure of the water jet?
Present hydraulic cylinders can operate up to 10,000 psi, but this
pressure can be increased without hugh cost overruns by increasing wall
thickness and number of seals, number of tie rods. Then the piston can
be driven by several hydraulic cylinders, providing an operation
pressure. An orifice can be located
at the other end of the cylinder. This seems to be not that hard to
implement even at home shop. Just a thought.
Alex
not a problem, the problem is a water jet.
In this respect why not to make a pressure cylinder, instead of a high
pressure pump, which could supply necessary pressure of the water jet?
Present hydraulic cylinders can operate up to 10,000 psi, but this
pressure can be increased without hugh cost overruns by increasing wall
thickness and number of seals, number of tie rods. Then the piston can
be driven by several hydraulic cylinders, providing an operation
pressure. An orifice can be located
at the other end of the cylinder. This seems to be not that hard to
implement even at home shop. Just a thought.
Alex
Discussion Thread
Bill Robertson
2004-09-26 21:47:18 UTC
Air blower?
josef wagner
2004-09-26 23:02:39 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
R Rogers
2004-09-26 23:03:44 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
Tony Jeffree
2004-09-26 23:28:12 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
Bill Robertson
2004-09-27 06:26:33 UTC
Re: Air blower?
turbulatordude
2004-09-27 06:37:48 UTC
Re: Air blower?
R Rogers
2004-09-27 06:56:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
R Rogers
2004-09-27 06:59:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
Bill Robertson
2004-09-27 07:05:25 UTC
Re: Air blower?
R Rogers
2004-09-27 07:30:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Air blower?
Jon Elson
2004-09-27 17:16:29 UTC
Re: [CAD_CAM_EDM_DRO] Air blower?
alex
2004-10-17 14:44:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-17 17:40:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-17 17:49:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 07:30:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 07:38:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
turbulatordude
2004-10-18 09:06:04 UTC
Re: water jet
alex
2004-10-18 09:26:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 09:28:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 09:51:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
John Cox
2004-10-18 10:16:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-18 10:21:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
caudlet
2004-10-18 10:33:07 UTC
Re: water jet
ftomazz
2004-10-18 10:56:55 UTC
Re: water jet
R Rogers
2004-10-18 11:52:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 14:38:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 15:44:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 16:27:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bruce Craig
2004-10-18 16:44:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Bob McKnight
2004-10-18 17:55:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-18 18:02:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Jon Elson
2004-10-18 18:38:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
metlmunchr
2004-10-18 19:13:51 UTC
Re: water jet
josef wagner
2004-10-19 01:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-19 07:04:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
turbulatordude
2004-10-19 09:08:16 UTC
Re: water jet
josef wagner
2004-10-19 09:08:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
alex
2004-10-19 09:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-19 10:28:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
Mark Stacey
2004-10-19 14:21:12 UTC
Re: water jet
alex
2004-10-19 14:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet
R Rogers
2004-10-19 16:22:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: water jet