CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's

on 2005-09-29 06:27:03 UTC
Dave,

If you have a manual for the 7475 that would be great. If you find it
maybe you could read up on the error codes, error light and what to do about
them, besides just reset with a power on and off or a front panel reset by
pushing the "Enter" button and "View" button at the same time. Any info
would be a great help.

Thanks

Victor
----- Original Message -----
From: "caedave" <caedave@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, September 28, 2005 6:39 PM
Subject: Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's


> Not with the servo's as such and it's some time ago that I used the
> 7475 plotter among others, so I can't remember which one it is.
>
> So here goes with some general info on HP Plotters.
>
> Normally Serial Comm.'s but could also have a parallel port fitted.
>
> Dip switches will need to be set for correct comm's protocol and speed.
> (quite often hidden in the machine)
>
> Correct driver software for that specific plotter (HP site may still list
> it)
> as HP had the habit of different drivers for different plotters rather
> than
> a standard driver. I use a HP9000 series plotter but modern XP drivers
> will not give me pen selection, it just picks up the first available in
> the
> pen turret.
>
> Finally you will need to define the plotter in the computer set up and
> possibly in the application.
>
> I know when I retired I had some HP Plotter manuals and I think
> the 7475 was among them, I can have a search if it will help but it will
> not be a quick job.
> (one who never throws anything away).
>
> Dave M.
>
> ----- Original Message -----
> From: "Victor A. Estes" <emc3zach@...>
> Subject: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
>
>
>> Has anybody had any experience with HP's 7475 Plotter servo's. I have an
>> old hp 7475 plotter that seems to work (demo prints) but has a
>> communication problem with my computer. Was wondering if any one has
>> used
>> these servo's in other projects? I.E. hooked them up to a servo
>> controller
>> and ran them off of another program such as EMC or one of the others? If
>> I can't get the plotter to talk to the computer I would like to salvage
>> the servo's and use as something else. The plotter has a constant
>> blinking error light that will not reset, and does not seem to be
>> communicating with the computer. I hooked up a new serial null modem
>> cable, but still am unable to get the plotter to respond to the computer
>> commands through DOS and the COM1 port.
>>
>> I was thinking of maybe using the servo's in an egg decorating machine.
>> I
>> saw one on a CNC art web site.
>>
>> I know the servo's work because from the control panel I can make the
>> plotter pick up pens and also do the demo plot.
>>
>> Any Suggestions?
>>
>> Victor
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.8/114 - Release Date: 28/09/2005
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Discussion Thread

Victor A. Estes 2005-09-28 15:07:11 UTC Hp 7475 Plotter Servo's Alan Marconett 2005-09-28 16:07:37 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's caedave 2005-09-28 16:39:50 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Blue 2005-09-28 17:21:20 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's KM6VV 2005-09-28 17:42:19 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's jerry stout 2005-09-29 06:19:02 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 06:22:39 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:26:13 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:27:03 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:36:28 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 06:39:20 UTC Re: Hp 7475 Plotter Servo's - Drag knife turbulatordude 2005-09-29 06:41:22 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:44:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:56:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's - Drag knife Blue 2005-09-29 06:57:26 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 07:03:15 UTC Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:24:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:27:34 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:36:10 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 08:40:50 UTC Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:46:36 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:51:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's turbulatordude 2005-09-29 08:57:09 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 09:31:46 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 09:42:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Hugh Prescott 2005-09-29 09:59:47 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Randy Gordon-Gilmore 2005-09-29 10:10:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Hugh Prescott 2005-09-29 10:12:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:15:50 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:20:41 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:50:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 13:49:14 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 13:59:11 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's George Taylor, IV 2005-09-29 14:47:37 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Tom Harrison 2005-09-29 15:40:38 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's caedave 2005-09-30 04:01:38 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Raymond Heckert 2005-09-30 19:49:59 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-02 11:47:41 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-10-02 13:15:26 UTC Re: Hp 7475 Plotter Servo's caedave 2005-10-03 05:06:06 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-03 08:00:58 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-10-03 11:06:16 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 07:11:07 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Stephen Wille Padnos 2005-10-04 07:33:42 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Jymmm 2005-10-04 09:36:44 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 11:14:20 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 14:42:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-20 09:33:45 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Russ Waters 2005-10-20 09:51:47 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's wbhinkle@a... 2005-10-20 10:01:24 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Hugh Prescott 2005-10-20 10:22:17 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-10-20 10:35:37 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT Victor A. Estes 2005-10-20 10:40:18 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Roy J. Tellason 2005-10-20 10:41:43 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's wbhinkle@a... 2005-10-20 10:44:18 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-20 11:22:37 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT emc3zach 2005-10-20 14:29:58 UTC Re: Hp 7475 Plotter Servo's Roy J. Tellason 2005-10-20 15:58:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-21 06:17:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's