RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of turbulatordude
> Sent: Thursday, September 29, 2005 8:57 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Alan Marconett" <KM6VV@a...>
> wrote:
> > Hi Dave,
> >
> > They are servos? I always guessed they were steppers.
>
>
> yup, that's why I saved the boards. I figured that with a driver
> board and servo's it would make a great PCB machine. All I would need
> to do is to change the stepper on the carosel to be the Z axis and it
> would be complete.
>
> I junked 90% of the two I pulled apart, kept just a small amout of the
> parts, and unfortunatly, lost one set of motors.
>
> Dave
>