CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's

on 2005-10-04 14:42:31 UTC
Thanks Jim for the info.

Victor A.
----- Original Message -----
From: "Jymmm" <jymmm@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 04, 2005 11:36 AM
Subject: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's


>I really haven't been keeping up with this thread, but...
>
> Most have a self-test mode - at least you can see if
> everything is operational on the plotter side.
>
> Try holding down a button, then turning on the power switch.
>
>
> This mentions a unique cable pinout (and dipswitch settings):
> http://www.blobulent.com/hp300/FAQ/rossspon/dip.htm
>
>
> As far as HPGL and/or PLT files, here is the link to the technical
> manuals.
> The link will probably wrap, so be sure to copy and paste all of it.
>
> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=5961-0976&lang=English+%28US%29
>
> You can order a cd, or download all of them from that link.
> Yes, it says PCL, but they include HPGL too.
>
> HP *used* to include a post card in their printers so that anyone could
> have
> a printed set of the programming manuals. They are great technical
> reference.
>
> From PURE DOS, you can copy a PLT file directly to the port and have it
> print
> the file without any drivers, example:
>
> copy report1.plt com2:
>
> At least this would be a good method to test everything out.
>
>
> Here's another mention of a 'reverse cable' (?!)
> http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=88943
>
>
> Jim...
>
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Discussion Thread

Victor A. Estes 2005-09-28 15:07:11 UTC Hp 7475 Plotter Servo's Alan Marconett 2005-09-28 16:07:37 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's caedave 2005-09-28 16:39:50 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Blue 2005-09-28 17:21:20 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's KM6VV 2005-09-28 17:42:19 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's jerry stout 2005-09-29 06:19:02 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 06:22:39 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:26:13 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:27:03 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:36:28 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 06:39:20 UTC Re: Hp 7475 Plotter Servo's - Drag knife turbulatordude 2005-09-29 06:41:22 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:44:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 06:56:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's - Drag knife Blue 2005-09-29 06:57:26 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 07:03:15 UTC Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:24:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:27:34 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:36:10 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-09-29 08:40:50 UTC Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:46:36 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 08:51:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's turbulatordude 2005-09-29 08:57:09 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 09:31:46 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 09:42:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Hugh Prescott 2005-09-29 09:59:47 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Randy Gordon-Gilmore 2005-09-29 10:10:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Hugh Prescott 2005-09-29 10:12:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:15:50 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:20:41 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 10:50:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-09-29 13:49:14 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-09-29 13:59:11 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's George Taylor, IV 2005-09-29 14:47:37 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Tom Harrison 2005-09-29 15:40:38 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's caedave 2005-09-30 04:01:38 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Raymond Heckert 2005-09-30 19:49:59 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-02 11:47:41 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-10-02 13:15:26 UTC Re: Hp 7475 Plotter Servo's caedave 2005-10-03 05:06:06 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-03 08:00:58 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's turbulatordude 2005-10-03 11:06:16 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 07:11:07 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Stephen Wille Padnos 2005-10-04 07:33:42 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Jymmm 2005-10-04 09:36:44 UTC Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 11:14:20 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-04 14:42:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-20 09:33:45 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Russ Waters 2005-10-20 09:51:47 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's wbhinkle@a... 2005-10-20 10:01:24 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Hugh Prescott 2005-10-20 10:22:17 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Alan Marconett 2005-10-20 10:35:37 UTC RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT Victor A. Estes 2005-10-20 10:40:18 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Roy J. Tellason 2005-10-20 10:41:43 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's wbhinkle@a... 2005-10-20 10:44:18 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's Victor A. Estes 2005-10-20 11:22:37 UTC Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT emc3zach 2005-10-20 14:29:58 UTC Re: Hp 7475 Plotter Servo's Roy J. Tellason 2005-10-20 15:58:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's Victor A. Estes 2005-10-21 06:17:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's