Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Posted by
Victor A. Estes
on 2005-10-20 10:40:18 UTC
I tried a serial cable with a db9 null modem adapter and a db9 to db25
changer on it. Would not work. Also tied wireing my own cable from the pin
outs listed in the manual. Still would not work. I will keep trying and
thanks for the info.
Victor A. Estes
changer on it. Would not work. Also tied wireing my own cable from the pin
outs listed in the manual. Still would not work. I will keep trying and
thanks for the info.
Victor A. Estes
----- Original Message -----
From: <wbhinkle@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 20, 2005 11:57 AM
Subject: Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
> In a message dated 10/20/2005 11:53:29 AM Central Standard Time,
> mycncworld@... writes:
> Hi... I just seen your post, and if it helps, it is a "null" cable that
> you
> will need. I have on that I used to use to plot my drawings, but now is
> just
> collecting dust on the shelf! I do have manuals and if you need any
> specific
> information, just let me know and I will do my best to pass them on.
>
> Russ
> Russ is right that it takes a null modem cable but not just an off the
> shelf
> null modem cable will work. I had to buy a special null modem cable from
> HP to
> get my 7475 HP Plotter towork. I had bought 2 other brands of null modem
> cables that didn't work.
> bill hinkle
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
Discussion Thread
Victor A. Estes
2005-09-28 15:07:11 UTC
Hp 7475 Plotter Servo's
Alan Marconett
2005-09-28 16:07:37 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
caedave
2005-09-28 16:39:50 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Blue
2005-09-28 17:21:20 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
KM6VV
2005-09-28 17:42:19 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
jerry stout
2005-09-29 06:19:02 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 06:22:39 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:26:13 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:27:03 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:36:28 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 06:39:20 UTC
Re: Hp 7475 Plotter Servo's - Drag knife
turbulatordude
2005-09-29 06:41:22 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:44:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:56:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's - Drag knife
Blue
2005-09-29 06:57:26 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 07:03:15 UTC
Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:24:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:27:34 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:36:10 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 08:40:50 UTC
Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:46:36 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:51:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 08:57:09 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 09:31:46 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 09:42:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Hugh Prescott
2005-09-29 09:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Randy Gordon-Gilmore
2005-09-29 10:10:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Hugh Prescott
2005-09-29 10:12:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:15:50 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:20:41 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:50:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 13:49:14 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 13:59:11 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
George Taylor, IV
2005-09-29 14:47:37 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Tom Harrison
2005-09-29 15:40:38 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
caedave
2005-09-30 04:01:38 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Raymond Heckert
2005-09-30 19:49:59 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-02 11:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-10-02 13:15:26 UTC
Re: Hp 7475 Plotter Servo's
caedave
2005-10-03 05:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-03 08:00:58 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-10-03 11:06:16 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 07:11:07 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Stephen Wille Padnos
2005-10-04 07:33:42 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Jymmm
2005-10-04 09:36:44 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 11:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 14:42:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-20 09:33:45 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Russ Waters
2005-10-20 09:51:47 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
wbhinkle@a...
2005-10-20 10:01:24 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Hugh Prescott
2005-10-20 10:22:17 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-10-20 10:35:37 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT
Victor A. Estes
2005-10-20 10:40:18 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Roy J. Tellason
2005-10-20 10:41:43 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
wbhinkle@a...
2005-10-20 10:44:18 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-20 11:22:37 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT
emc3zach
2005-10-20 14:29:58 UTC
Re: Hp 7475 Plotter Servo's
Roy J. Tellason
2005-10-20 15:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-21 06:17:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's