RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Posted by
Alan Marconett
on 2005-09-29 10:50:47 UTC
Hi Hugh,
Thanks! I have some future domain SCSI driver boards, as I recall.
Probably several Adaptec cards as well. They'll have to go in one of my
older machines, probably no space in an ATA.
I just can't imagine what "commands" are sent to a scanner via SCSI. But
then, there is a lot of data to be returned to the PC from the scanner, much
like a hard drive. So it's appropriate. I don't need the data transfer,
but I'd like to figure out some "move" commands. May be more effort then
its worth! ;>)
Alan KM6VV
Thanks! I have some future domain SCSI driver boards, as I recall.
Probably several Adaptec cards as well. They'll have to go in one of my
older machines, probably no space in an ATA.
I just can't imagine what "commands" are sent to a scanner via SCSI. But
then, there is a lot of data to be returned to the PC from the scanner, much
like a hard drive. So it's appropriate. I don't need the data transfer,
but I'd like to figure out some "move" commands. May be more effort then
its worth! ;>)
Alan KM6VV
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Hugh Prescott
> Sent: Thursday, September 29, 2005 10:18 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
>
> Alan
>
> I may have a set of driver disks for that scanner as I have one that still
> works with a good origonal SCSI card.
>
> If yours is the SCSI card that I have it is a wierd one that maps it's
> self
> into DOS UMB memory. Never got mine to work with anything later than Win
> 95
> but then with scanners with 10 times the performance and costing $20.00
> now
> who cares. <GRIN>
>
> Hugh
>
Discussion Thread
Victor A. Estes
2005-09-28 15:07:11 UTC
Hp 7475 Plotter Servo's
Alan Marconett
2005-09-28 16:07:37 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
caedave
2005-09-28 16:39:50 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Blue
2005-09-28 17:21:20 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
KM6VV
2005-09-28 17:42:19 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
jerry stout
2005-09-29 06:19:02 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 06:22:39 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:26:13 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:27:03 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:36:28 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 06:39:20 UTC
Re: Hp 7475 Plotter Servo's - Drag knife
turbulatordude
2005-09-29 06:41:22 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:44:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 06:56:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's - Drag knife
Blue
2005-09-29 06:57:26 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 07:03:15 UTC
Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:24:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:27:34 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:36:10 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 08:40:50 UTC
Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:46:36 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 08:51:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
turbulatordude
2005-09-29 08:57:09 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 09:31:46 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 09:42:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Hugh Prescott
2005-09-29 09:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Randy Gordon-Gilmore
2005-09-29 10:10:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Hugh Prescott
2005-09-29 10:12:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:15:50 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:20:41 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 10:50:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-09-29 13:49:14 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-09-29 13:59:11 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
George Taylor, IV
2005-09-29 14:47:37 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Tom Harrison
2005-09-29 15:40:38 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
caedave
2005-09-30 04:01:38 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Raymond Heckert
2005-09-30 19:49:59 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-02 11:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-10-02 13:15:26 UTC
Re: Hp 7475 Plotter Servo's
caedave
2005-10-03 05:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-03 08:00:58 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
turbulatordude
2005-10-03 11:06:16 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 07:11:07 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Stephen Wille Padnos
2005-10-04 07:33:42 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Jymmm
2005-10-04 09:36:44 UTC
Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 11:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-04 14:42:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-20 09:33:45 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Russ Waters
2005-10-20 09:51:47 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
wbhinkle@a...
2005-10-20 10:01:24 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Hugh Prescott
2005-10-20 10:22:17 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Alan Marconett
2005-10-20 10:35:37 UTC
RE: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT
Victor A. Estes
2005-10-20 10:40:18 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Roy J. Tellason
2005-10-20 10:41:43 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
wbhinkle@a...
2005-10-20 10:44:18 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-20 11:22:37 UTC
Re: [CAD_CAM_EDM_DRO] Hp 7475 Plotter Servo's, 3D surface modeling for EGG-BOT
emc3zach
2005-10-20 14:29:58 UTC
Re: Hp 7475 Plotter Servo's
Roy J. Tellason
2005-10-20 15:58:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's
Victor A. Estes
2005-10-21 06:17:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hp 7475 Plotter Servo's