Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Series I verse Series II CNC Refit Candidates

----- Original Message -----
From: "Polaraligned" <polaraligned@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 04, 2005 8:13 PM
Subject: [CAD_CAM_EDM_DRO] Re: Bridgeport Series I verse Series II CNC Refit
Candidates


>>
>> I'm a little confused on the Series 1 or 2 issue. I've ran and
> repaired both over the years, seen them sitting side by side and the
> only difference was the Series2 has a 48" table instead of 42" and the
> motor is 3hp instead of 2 or 1-1/2 hp. All other parts,castings,etc
> are identical. There must be two different mills that are referred to
> as a "Series 2". Or alot of different variants of it. All the CNC's
> were either Boss or Interact's. Pre-Series machines we always referred
> to as "J-heads".
>>
>> Ron
>
> Oh no. I guess you never seen a series 2 BP. The series 1 came with
> a 42" or 48" for the most part. The series 2 came with a 10" x 54"
> table and a 4 HP motor. I am unaware of a 3hp motor on any BP.
> The Series 2 mill dwarfs the series 1 machine by weighing about
> 5000# compared to a series 1 which is 2000#. There are no parts
> that are interchangeable on these machines that I am aware of.
> I think you may be confusing the 1j head and the 2j heads, but
> the machines are night and day different.
>
>
> Scott
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>