CAD CAM EDM DRO - Yahoo Group Archive

Re: Interface. Gauging interest.

on 2006-05-15 11:21:49 UTC
Many successful and popular CNC programs use the parallel port.
Repugnant though it may be, what other port would you suggest be used
instead that requires NO external hardware?

Mariss


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Jack Hudler" <yahoo@...>
wrote:
>
> JMO
> You just need to get away from using a parallel port period. I find
it repugnant
> that this practice is still being using in the 21st century.
>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com]
> On Behalf Of Mariss Freimanis
> Sent: Monday, May 15, 2006 12:30 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
>
> > ballendo wrote:
> >
> > What we truly need is a usb EQUIVALENT of the parallel port.
>
> That's just not possible for CNC programs that output step and
> direction signals from a parallel port. Step pulses have timing in
> the microsecond range. Example:
>
> 20kHz step pulse freq = 50uS period
> 19.9kHz step pulse freq = 50.25uS period
>
> The difference is only a 1/4 microsecond. USB serializes data which
> strips this timing information; the reconstituted parallel data
would
> bear no resemblence to the sent original.
>
> Mariss
>
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if you
> have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
be a sister
> site to the CCED group, as many of the same members are there, for
OT subjects,
> that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T
> POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>

Discussion Thread

Dennis Schmitz 2006-05-12 00:26:44 UTC Interface. Gauging interest. ballendo 2006-05-12 02:33:46 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-12 04:34:40 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-13 09:29:18 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-13 17:57:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. turbulatordude 2006-05-13 18:34:05 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 10:03:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 10:31:40 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 10:57:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 11:21:49 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 12:23:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 12:58:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 13:09:24 UTC Re: Interface. Gauging interest. Mike Pogue 2006-05-15 13:39:03 UTC USB-to-step/direction (was Interface. Gauging interest.) Codesuidae 2006-05-15 13:51:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 14:41:53 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 14:47:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike 2006-05-15 14:53:37 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 14:54:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:07:28 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:08:32 UTC Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:24:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-15 16:25:26 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-15 17:26:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 17:36:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 18:10:03 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:32:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:37:07 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) ballendo 2006-05-15 20:35:11 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 21:38:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. JanRwl@A... 2006-05-15 22:07:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-15 22:11:15 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) JanRwl@A... 2006-05-15 22:19:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 22:24:36 UTC Re: Interface. Gauging interest. Tony Jeffree 2006-05-15 22:32:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dave Halliday 2006-05-15 23:01:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:08:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:13:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:17:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:18:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 00:24:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:30:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 01:08:35 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:16:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:19:38 UTC OT Re: Interface. Gauging interest. ballendo 2006-05-16 01:25:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:32:25 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-16 02:07:21 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-16 04:23:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-16 06:03:14 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 07:49:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-16 08:04:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 08:23:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 09:11:32 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:14:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:23:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 09:36:00 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:42:33 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:49:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:55:54 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 10:03:37 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:05:29 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:19:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 10:39:14 UTC Re: Interface. Gauging interest. Dan Mauch 2006-05-16 11:05:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 11:32:18 UTC Re: Interface. Gauging interest. Dave Halliday 2006-05-16 11:32:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 11:51:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. wanliker@a... 2006-05-16 12:18:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 12:35:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:36:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 12:46:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:53:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 13:03:38 UTC OT Re: Interface. Gauging interest. wanliker@a... 2006-05-16 13:05:51 UTC Interface. Gauging interest. Codesuidae 2006-05-16 14:41:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 14:43:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 15:23:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 15:40:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 15:53:31 UTC Re: Interface. Gauging interest. Steve Blackmore 2006-05-16 17:22:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 17:29:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 18:47:10 UTC Re: Interface. Gauging interest. Jon Elson 2006-05-16 21:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 22:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Steve Blackmore 2006-05-17 00:05:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 05:32:10 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 07:06:18 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 08:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-17 08:55:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 09:22:57 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 09:47:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-17 09:58:14 UTC Irrelevant Gcode?!? wasRe: Interface. Gauging interest. ballendo 2006-05-17 10:00:45 UTC irrelevnat Gcodes was Re: Interface. Gauging interest. ballendo 2006-05-17 10:02:38 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-17 10:13:56 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 10:17:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-17 11:13:43 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-17 11:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-17 11:57:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 20:30:08 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:17 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 22:01:51 UTC Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest. lcdpublishing 2006-05-18 04:58:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-18 05:11:22 UTC OT Re: Interface. Gauging interest. Graham Stabler 2006-05-18 05:29:38 UTC OT Re: Interface. Gauging interest. Steve Blackmore 2006-05-18 16:31:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-18 20:53:29 UTC Re: Interface. Gauging interest. JanRwl@A... 2006-05-18 21:53:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-18 23:18:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-19 00:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 05:49:15 UTC Re: Interface. Gauging interest. Peter Reilley 2006-05-19 05:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 06:22:16 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 06:58:38 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 07:24:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:26:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:28:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-19 07:49:51 UTC [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 08:29:00 UTC Re: Interface. Gauging interest. yracg 2006-05-19 08:31:36 UTC Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 08:40:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 08:51:48 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 08:55:11 UTC Re: Interface. Gauging interest. wanliker@a... 2006-05-19 09:11:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 09:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:41:18 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:47:00 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 09:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:53:38 UTC Re: Interface. Gauging interest. John Dammeyer 2006-05-19 09:54:19 UTC USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-19 09:57:07 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:40:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:56:20 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) John Dammeyer 2006-05-19 11:23:37 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-19 11:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 12:05:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:07:56 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-19 12:27:31 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-19 12:48:01 UTC RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:56:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:33:20 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:36:36 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 14:00:01 UTC Re: USB CNC (was Interface. Gauging interest.) ballendo 2006-05-19 14:06:06 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-19 14:16:09 UTC RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) lcdpublishing 2006-05-19 14:28:40 UTC Re: PCI interface was ....Interface. Gauging interest. Alan Marconett 2006-05-19 14:42:25 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. delmar williams 2006-05-19 14:45:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Lester Caine 2006-05-19 15:06:22 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 15:34:56 UTC Re: USB CNC (was Interface. Gauging interest.) Codesuidae 2006-05-19 15:48:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 15:54:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. John Dammeyer 2006-05-19 17:13:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Paul Kelly 2006-05-19 17:19:27 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Mike Pogue 2006-05-19 17:54:12 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 17:59:40 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Anders Wallin 2006-05-19 21:49:32 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-20 00:00:48 UTC Re: USB CNC (was Interface. Gauging interest.) bob_kellock 2006-05-20 03:18:22 UTC Re: Interface. Gauging interest. Les Newell 2006-05-20 05:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-20 10:59:18 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Wayne C. Gramlich 2006-05-20 11:58:09 UTC Re: USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-20 13:37:35 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 14:14:20 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Hugh Prescott 2006-05-20 15:13:59 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Graham Stabler 2006-05-20 15:57:23 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 16:00:08 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC Dennis Schmitz 2006-05-20 16:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ronginger@a... 2006-05-20 17:53:16 UTC Re: USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-20 19:23:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Jack Hudler 2006-05-20 19:28:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-20 22:05:57 UTC Re: Interface. Gauging interest. ballendo 2006-05-20 22:26:51 UTC Re: USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-21 01:49:23 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 10:26:01 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 16:54:05 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Mariss Freimanis 2006-06-06 19:39:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-06-06 20:44:50 UTC ncPOD update, was Re: Interface. Gauging interest. John Stevenson 2006-06-06 22:55:16 UTC ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:20:00 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:30:33 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. turbulatordude 2006-06-07 08:34:04 UTC ncPOD update, Fred Smith 2006-06-07 11:00:14 UTC Re: ncPOD update, Tony Jeffree 2006-06-07 13:19:30 UTC Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,