CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.

on 2006-05-18 16:31:07 UTC
On Wed, 17 May 2006 22:30:07 -0500, you wrote:

>Servers run flawlessly because you don't have some user on it
>installing whatever little thing crosses their screen, while surfing
>the net, collecting worms, viruses, and dangerous ActiveX controls.

>As I've always said, Windows runs flawlessly if you take the user out
>of the equation and never, ever install any software on it. It only
>becomes unstable if you try to use it for real work and stuff.

So it's not windows then, it's the muppets that use it. Those same
muppets use the servers thousands of times a day, they copy files
backwards and forwards, they surf the net, they send and receive
external email and attachments - they don't get viruses, trojans and
dangerous activeX stuff. They don't get much spam either, the odd one
slips through, but as soon as it's reported it doesn't happen again.
Simply - it's set up properly and all autonomous, apart from adding the
odd manual spam filter and reading the daily reports to check it's all
happening as it should.

Only drawback is - it costs money. People are happy to spend many
hundreds or thousands on hardware and whine when it comes to spending
money on security software.

I've no sympathy whatsoever for anybody who connects any server or PC to
the outside world without taking adequate precautions whether it be
Linux, Unix, Windows or whatever other OS you care to run.

I'm not complaining though, it's made me thousands over the years ;)

Steve Blackmore
--

Discussion Thread

Dennis Schmitz 2006-05-12 00:26:44 UTC Interface. Gauging interest. ballendo 2006-05-12 02:33:46 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-12 04:34:40 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-13 09:29:18 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-13 17:57:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. turbulatordude 2006-05-13 18:34:05 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 10:03:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 10:31:40 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 10:57:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 11:21:49 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 12:23:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 12:58:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 13:09:24 UTC Re: Interface. Gauging interest. Mike Pogue 2006-05-15 13:39:03 UTC USB-to-step/direction (was Interface. Gauging interest.) Codesuidae 2006-05-15 13:51:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 14:41:53 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 14:47:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike 2006-05-15 14:53:37 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 14:54:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:07:28 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:08:32 UTC Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:24:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-15 16:25:26 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-15 17:26:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 17:36:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 18:10:03 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:32:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:37:07 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) ballendo 2006-05-15 20:35:11 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 21:38:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. JanRwl@A... 2006-05-15 22:07:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-15 22:11:15 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) JanRwl@A... 2006-05-15 22:19:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 22:24:36 UTC Re: Interface. Gauging interest. Tony Jeffree 2006-05-15 22:32:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dave Halliday 2006-05-15 23:01:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:08:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:13:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:17:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:18:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 00:24:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:30:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 01:08:35 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:16:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:19:38 UTC OT Re: Interface. Gauging interest. ballendo 2006-05-16 01:25:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:32:25 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-16 02:07:21 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-16 04:23:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-16 06:03:14 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 07:49:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-16 08:04:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 08:23:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 09:11:32 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:14:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:23:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 09:36:00 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:42:33 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:49:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:55:54 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 10:03:37 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:05:29 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:19:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 10:39:14 UTC Re: Interface. Gauging interest. Dan Mauch 2006-05-16 11:05:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 11:32:18 UTC Re: Interface. Gauging interest. Dave Halliday 2006-05-16 11:32:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 11:51:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. wanliker@a... 2006-05-16 12:18:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 12:35:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:36:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 12:46:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:53:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 13:03:38 UTC OT Re: Interface. Gauging interest. wanliker@a... 2006-05-16 13:05:51 UTC Interface. Gauging interest. Codesuidae 2006-05-16 14:41:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 14:43:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 15:23:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 15:40:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 15:53:31 UTC Re: Interface. Gauging interest. Steve Blackmore 2006-05-16 17:22:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 17:29:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 18:47:10 UTC Re: Interface. Gauging interest. Jon Elson 2006-05-16 21:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 22:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Steve Blackmore 2006-05-17 00:05:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 05:32:10 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 07:06:18 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 08:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-17 08:55:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 09:22:57 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 09:47:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-17 09:58:14 UTC Irrelevant Gcode?!? wasRe: Interface. Gauging interest. ballendo 2006-05-17 10:00:45 UTC irrelevnat Gcodes was Re: Interface. Gauging interest. ballendo 2006-05-17 10:02:38 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-17 10:13:56 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 10:17:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-17 11:13:43 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-17 11:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-17 11:57:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 20:30:08 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:17 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 22:01:51 UTC Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest. lcdpublishing 2006-05-18 04:58:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-18 05:11:22 UTC OT Re: Interface. Gauging interest. Graham Stabler 2006-05-18 05:29:38 UTC OT Re: Interface. Gauging interest. Steve Blackmore 2006-05-18 16:31:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-18 20:53:29 UTC Re: Interface. Gauging interest. JanRwl@A... 2006-05-18 21:53:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-18 23:18:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-19 00:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 05:49:15 UTC Re: Interface. Gauging interest. Peter Reilley 2006-05-19 05:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 06:22:16 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 06:58:38 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 07:24:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:26:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:28:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-19 07:49:51 UTC [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 08:29:00 UTC Re: Interface. Gauging interest. yracg 2006-05-19 08:31:36 UTC Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 08:40:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 08:51:48 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 08:55:11 UTC Re: Interface. Gauging interest. wanliker@a... 2006-05-19 09:11:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 09:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:41:18 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:47:00 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 09:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:53:38 UTC Re: Interface. Gauging interest. John Dammeyer 2006-05-19 09:54:19 UTC USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-19 09:57:07 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:40:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:56:20 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) John Dammeyer 2006-05-19 11:23:37 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-19 11:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 12:05:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:07:56 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-19 12:27:31 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-19 12:48:01 UTC RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:56:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:33:20 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:36:36 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 14:00:01 UTC Re: USB CNC (was Interface. Gauging interest.) ballendo 2006-05-19 14:06:06 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-19 14:16:09 UTC RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) lcdpublishing 2006-05-19 14:28:40 UTC Re: PCI interface was ....Interface. Gauging interest. Alan Marconett 2006-05-19 14:42:25 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. delmar williams 2006-05-19 14:45:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Lester Caine 2006-05-19 15:06:22 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 15:34:56 UTC Re: USB CNC (was Interface. Gauging interest.) Codesuidae 2006-05-19 15:48:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 15:54:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. John Dammeyer 2006-05-19 17:13:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Paul Kelly 2006-05-19 17:19:27 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Mike Pogue 2006-05-19 17:54:12 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 17:59:40 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Anders Wallin 2006-05-19 21:49:32 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-20 00:00:48 UTC Re: USB CNC (was Interface. Gauging interest.) bob_kellock 2006-05-20 03:18:22 UTC Re: Interface. Gauging interest. Les Newell 2006-05-20 05:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-20 10:59:18 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Wayne C. Gramlich 2006-05-20 11:58:09 UTC Re: USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-20 13:37:35 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 14:14:20 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Hugh Prescott 2006-05-20 15:13:59 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Graham Stabler 2006-05-20 15:57:23 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 16:00:08 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC Dennis Schmitz 2006-05-20 16:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ronginger@a... 2006-05-20 17:53:16 UTC Re: USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-20 19:23:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Jack Hudler 2006-05-20 19:28:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-20 22:05:57 UTC Re: Interface. Gauging interest. ballendo 2006-05-20 22:26:51 UTC Re: USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-21 01:49:23 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 10:26:01 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 16:54:05 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Mariss Freimanis 2006-06-06 19:39:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-06-06 20:44:50 UTC ncPOD update, was Re: Interface. Gauging interest. John Stevenson 2006-06-06 22:55:16 UTC ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:20:00 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:30:33 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. turbulatordude 2006-06-07 08:34:04 UTC ncPOD update, Fred Smith 2006-06-07 11:00:14 UTC Re: ncPOD update, Tony Jeffree 2006-06-07 13:19:30 UTC Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,