RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Posted by
Alan Marconett
on 2006-05-19 14:16:09 UTC
Hi Wayne,
You've already got a 16C745 USB PIC on your board, are you using it yet?
You mentioned 115K UART. You can run interrupts at 20uS and collect UART
data as well? Looks like you have the option of using either as well!
Nice job! And again I see a "USB-CNC-PARALLEL" (+ SERIAL) board. OK, so
it's prevalent already!
Can an 18F4550 PIC be dropped into your design (FLASH!)? The clock would
need changing, I suppose, but what else?
Alan KM6VV
You've already got a 16C745 USB PIC on your board, are you using it yet?
You mentioned 115K UART. You can run interrupts at 20uS and collect UART
data as well? Looks like you have the option of using either as well!
Nice job! And again I see a "USB-CNC-PARALLEL" (+ SERIAL) board. OK, so
it's prevalent already!
Can an 18F4550 PIC be dropped into your design (FLASH!)? The clock would
need changing, I suppose, but what else?
Alan KM6VV
> >
>
> What you describe below is largely what I have already
> implemented. The primary difference is that I have
> slower UART running at 115200 baud, and thus need a
> larger buffer to get everything done. In addition,
> I do some compression on the data stream the the PIC
> uncompresses.
>
> However, the back end process that I implement in the
> PIC is a simple circular buffer where I dump the
> step/dir line states and they are cleared out every
> 20uS. This is exactly what you describe.
> <snip>
>
> -Wayne
>
Discussion Thread
Dennis Schmitz
2006-05-12 00:26:44 UTC
Interface. Gauging interest.
ballendo
2006-05-12 02:33:46 UTC
Re: Interface. Gauging interest.
lcdpublishing
2006-05-12 04:34:40 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-05-13 09:29:18 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-13 17:57:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
turbulatordude
2006-05-13 18:34:05 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 10:03:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 10:31:40 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 10:57:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 11:21:49 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 12:23:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 12:58:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 13:09:24 UTC
Re: Interface. Gauging interest.
Mike Pogue
2006-05-15 13:39:03 UTC
USB-to-step/direction (was Interface. Gauging interest.)
Codesuidae
2006-05-15 13:51:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-15 14:41:53 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 14:47:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike
2006-05-15 14:53:37 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 14:54:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 15:07:28 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 15:08:32 UTC
Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 15:24:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 15:28:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-15 16:25:26 UTC
Re: Interface. Gauging interest.
Graham Stabler
2006-05-15 17:26:42 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 17:36:42 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 18:10:03 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 18:32:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-15 18:37:07 UTC
Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.)
ballendo
2006-05-15 20:35:11 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 21:38:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
JanRwl@A...
2006-05-15 22:07:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-15 22:11:15 UTC
Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.)
JanRwl@A...
2006-05-15 22:19:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-15 22:24:36 UTC
Re: Interface. Gauging interest.
Tony Jeffree
2006-05-15 22:32:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dave Halliday
2006-05-15 23:01:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:08:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:13:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-16 00:17:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:18:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 00:24:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-16 00:30:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 01:08:35 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:16:52 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:19:38 UTC
OT Re: Interface. Gauging interest.
ballendo
2006-05-16 01:25:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:32:25 UTC
Re: Interface. Gauging interest.
Graham Stabler
2006-05-16 02:07:21 UTC
Re: Interface. Gauging interest.
Lester Caine
2006-05-16 04:23:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-16 06:03:14 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 07:49:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-16 08:04:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 08:23:35 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 09:11:32 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-16 09:14:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 09:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
gort38
2006-05-16 09:36:00 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:42:33 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:49:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:55:54 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 10:03:37 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 10:05:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 10:19:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 10:39:14 UTC
Re: Interface. Gauging interest.
Dan Mauch
2006-05-16 11:05:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
gort38
2006-05-16 11:32:18 UTC
Re: Interface. Gauging interest.
Dave Halliday
2006-05-16 11:32:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 11:51:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
wanliker@a...
2006-05-16 12:18:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 12:35:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 12:36:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 12:46:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 12:53:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 13:03:38 UTC
OT Re: Interface. Gauging interest.
wanliker@a...
2006-05-16 13:05:51 UTC
Interface. Gauging interest.
Codesuidae
2006-05-16 14:41:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 14:43:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-16 15:23:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 15:40:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 15:53:31 UTC
Re: Interface. Gauging interest.
Steve Blackmore
2006-05-16 17:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-16 17:29:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 18:47:10 UTC
Re: Interface. Gauging interest.
Jon Elson
2006-05-16 21:44:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 22:42:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Steve Blackmore
2006-05-17 00:05:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 05:32:10 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-17 07:06:18 UTC
Re: Interface. Gauging interest.
Phil Mattison
2006-05-17 08:51:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-17 08:55:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 09:22:57 UTC
Re: Interface. Gauging interest.
Phil Mattison
2006-05-17 09:47:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-17 09:58:14 UTC
Irrelevant Gcode?!? wasRe: Interface. Gauging interest.
ballendo
2006-05-17 10:00:45 UTC
irrelevnat Gcodes was Re: Interface. Gauging interest.
ballendo
2006-05-17 10:02:38 UTC
Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 10:13:56 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-17 10:17:41 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-05-17 11:13:43 UTC
Re: Interface. Gauging interest.
Lester Caine
2006-05-17 11:40:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-17 11:57:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-17 20:30:08 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-17 21:04:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-17 21:04:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-17 22:01:51 UTC
Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest.
lcdpublishing
2006-05-18 04:58:52 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-18 05:11:22 UTC
OT Re: Interface. Gauging interest.
Graham Stabler
2006-05-18 05:29:38 UTC
OT Re: Interface. Gauging interest.
Steve Blackmore
2006-05-18 16:31:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-18 20:53:29 UTC
Re: Interface. Gauging interest.
JanRwl@A...
2006-05-18 21:53:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-18 23:18:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-19 00:51:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-19 05:49:15 UTC
Re: Interface. Gauging interest.
Peter Reilley
2006-05-19 05:59:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-19 06:22:16 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-19 06:58:38 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-19 07:24:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 07:26:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 07:28:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-19 07:49:51 UTC
[CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-19 08:29:00 UTC
Re: Interface. Gauging interest.
yracg
2006-05-19 08:31:36 UTC
Re: Interface. Gauging interest.
Wayne Weedon
2006-05-19 08:40:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 08:51:48 UTC
Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 08:55:11 UTC
Re: Interface. Gauging interest.
wanliker@a...
2006-05-19 09:11:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-19 09:37:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:41:18 UTC
Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:47:00 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-19 09:48:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:53:38 UTC
Re: Interface. Gauging interest.
John Dammeyer
2006-05-19 09:54:19 UTC
USB CNC (was Interface. Gauging interest.)
Jack Hudler
2006-05-19 09:57:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 10:40:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 10:56:20 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
John Dammeyer
2006-05-19 11:23:37 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
Mike Pogue
2006-05-19 11:59:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-19 12:05:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 12:07:56 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
Mariss Freimanis
2006-05-19 12:27:31 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-19 12:48:01 UTC
RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 12:56:08 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 13:33:20 UTC
Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 13:36:36 UTC
Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 14:00:01 UTC
Re: USB CNC (was Interface. Gauging interest.)
ballendo
2006-05-19 14:06:06 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 14:16:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
lcdpublishing
2006-05-19 14:28:40 UTC
Re: PCI interface was ....Interface. Gauging interest.
Alan Marconett
2006-05-19 14:42:25 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
delmar williams
2006-05-19 14:45:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Lester Caine
2006-05-19 15:06:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 15:34:56 UTC
Re: USB CNC (was Interface. Gauging interest.)
Codesuidae
2006-05-19 15:48:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne Weedon
2006-05-19 15:54:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
John Dammeyer
2006-05-19 17:13:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Paul Kelly
2006-05-19 17:19:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Mike Pogue
2006-05-19 17:54:12 UTC
Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 17:59:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Anders Wallin
2006-05-19 21:49:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Wayne C. Gramlich
2006-05-20 00:00:48 UTC
Re: USB CNC (was Interface. Gauging interest.)
bob_kellock
2006-05-20 03:18:22 UTC
Re: Interface. Gauging interest.
Les Newell
2006-05-20 05:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-20 10:59:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Wayne C. Gramlich
2006-05-20 11:58:09 UTC
Re: USB CNC (was Interface. Gauging interest.)
Mariss Freimanis
2006-05-20 13:37:35 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-20 14:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Hugh Prescott
2006-05-20 15:13:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Graham Stabler
2006-05-20 15:57:23 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-20 16:00:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC
Dennis Schmitz
2006-05-20 16:48:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ronginger@a...
2006-05-20 17:53:16 UTC
Re: USB CNC (was Interface. Gauging interest.)
Jack Hudler
2006-05-20 19:23:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Jack Hudler
2006-05-20 19:28:08 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-20 22:05:57 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-20 22:26:51 UTC
Re: USB CNC (was Interface. Gauging interest.)
Mike Pogue
2006-05-21 01:49:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-21 10:26:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-21 16:54:05 UTC
Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Mariss Freimanis
2006-06-06 19:39:41 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-06-06 20:44:50 UTC
ncPOD update, was Re: Interface. Gauging interest.
John Stevenson
2006-06-06 22:55:16 UTC
ncPOD update, was Re: Interface. Gauging interest.
Tony Jeffree
2006-06-07 00:20:00 UTC
Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest.
Tony Jeffree
2006-06-07 00:30:33 UTC
Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest.
turbulatordude
2006-06-07 08:34:04 UTC
ncPOD update,
Fred Smith
2006-06-07 11:00:14 UTC
Re: ncPOD update,
Tony Jeffree
2006-06-07 13:19:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,