Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Posted by
Steve Blackmore
on 2006-05-16 17:22:39 UTC
On Tue, 16 May 2006 20:42:40 +0100, you wrote:
year without a boot? (The two remaining NT4 ones are going in the trash
next week, been replaced with 2003 and have been stand by for a few
months )
If you have flakey hardware or some crap software with memory leaks
(like exchange ;), occasionally a boot is necessary, but unless that is
the case, leave well alone. I've had many more instances of servers
failing after a boot, than just failing on their own ;)
Sure, occasionally a fan, drive or power supply will fail, but I can hot
swap all of those.
The only thing I do with the application clusters is switch them over on
a monthly basis so one is not getting all the action. All the other file
servers just get temp files deleted and defrags weekly. The ones that
speak to the outside world get booted when Microsoft deem it because
they get regular security and software updates. Other than that I leave
well alone.
Steve Blackmore
--
>The only windows machines we can run 24/7 are NT4/SP6a but they stillWhy? I've NT4, 2K and 2003 servers that have run flawlessly for over a
>get a regular reboot :(
year without a boot? (The two remaining NT4 ones are going in the trash
next week, been replaced with 2003 and have been stand by for a few
months )
If you have flakey hardware or some crap software with memory leaks
(like exchange ;), occasionally a boot is necessary, but unless that is
the case, leave well alone. I've had many more instances of servers
failing after a boot, than just failing on their own ;)
Sure, occasionally a fan, drive or power supply will fail, but I can hot
swap all of those.
The only thing I do with the application clusters is switch them over on
a monthly basis so one is not getting all the action. All the other file
servers just get temp files deleted and defrags weekly. The ones that
speak to the outside world get booted when Microsoft deem it because
they get regular security and software updates. Other than that I leave
well alone.
Steve Blackmore
--
Discussion Thread
Dennis Schmitz
2006-05-12 00:26:44 UTC
Interface. Gauging interest.
ballendo
2006-05-12 02:33:46 UTC
Re: Interface. Gauging interest.
lcdpublishing
2006-05-12 04:34:40 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-05-13 09:29:18 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-13 17:57:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
turbulatordude
2006-05-13 18:34:05 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 10:03:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 10:31:40 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 10:57:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 11:21:49 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 12:23:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 12:58:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 13:09:24 UTC
Re: Interface. Gauging interest.
Mike Pogue
2006-05-15 13:39:03 UTC
USB-to-step/direction (was Interface. Gauging interest.)
Codesuidae
2006-05-15 13:51:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-15 14:41:53 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 14:47:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike
2006-05-15 14:53:37 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 14:54:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 15:07:28 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-15 15:08:32 UTC
Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 15:24:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-15 15:28:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-15 16:25:26 UTC
Re: Interface. Gauging interest.
Graham Stabler
2006-05-15 17:26:42 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 17:36:42 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-15 18:10:03 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-15 18:32:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-15 18:37:07 UTC
Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.)
ballendo
2006-05-15 20:35:11 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-15 21:38:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
JanRwl@A...
2006-05-15 22:07:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-15 22:11:15 UTC
Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.)
JanRwl@A...
2006-05-15 22:19:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-15 22:24:36 UTC
Re: Interface. Gauging interest.
Tony Jeffree
2006-05-15 22:32:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dave Halliday
2006-05-15 23:01:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:08:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:13:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-16 00:17:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 00:18:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 00:24:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-16 00:30:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 01:08:35 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:16:52 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:19:38 UTC
OT Re: Interface. Gauging interest.
ballendo
2006-05-16 01:25:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 01:32:25 UTC
Re: Interface. Gauging interest.
Graham Stabler
2006-05-16 02:07:21 UTC
Re: Interface. Gauging interest.
Lester Caine
2006-05-16 04:23:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-16 06:03:14 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 07:49:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-16 08:04:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 08:23:35 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 09:11:32 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-16 09:14:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 09:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
gort38
2006-05-16 09:36:00 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:42:33 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:49:07 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 09:55:54 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-16 10:03:37 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 10:05:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 10:19:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 10:39:14 UTC
Re: Interface. Gauging interest.
Dan Mauch
2006-05-16 11:05:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
gort38
2006-05-16 11:32:18 UTC
Re: Interface. Gauging interest.
Dave Halliday
2006-05-16 11:32:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-16 11:51:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
wanliker@a...
2006-05-16 12:18:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 12:35:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 12:36:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 12:46:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 12:53:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 13:03:38 UTC
OT Re: Interface. Gauging interest.
wanliker@a...
2006-05-16 13:05:51 UTC
Interface. Gauging interest.
Codesuidae
2006-05-16 14:41:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-16 14:43:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-16 15:23:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Codesuidae
2006-05-16 15:40:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-16 15:53:31 UTC
Re: Interface. Gauging interest.
Steve Blackmore
2006-05-16 17:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-16 17:29:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-16 18:47:10 UTC
Re: Interface. Gauging interest.
Jon Elson
2006-05-16 21:44:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-16 22:42:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Steve Blackmore
2006-05-17 00:05:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 05:32:10 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-17 07:06:18 UTC
Re: Interface. Gauging interest.
Phil Mattison
2006-05-17 08:51:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Roy J. Tellason
2006-05-17 08:55:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 09:22:57 UTC
Re: Interface. Gauging interest.
Phil Mattison
2006-05-17 09:47:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-17 09:58:14 UTC
Irrelevant Gcode?!? wasRe: Interface. Gauging interest.
ballendo
2006-05-17 10:00:45 UTC
irrelevnat Gcodes was Re: Interface. Gauging interest.
ballendo
2006-05-17 10:02:38 UTC
Re: Interface. Gauging interest.
lcdpublishing
2006-05-17 10:13:56 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-17 10:17:41 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-05-17 11:13:43 UTC
Re: Interface. Gauging interest.
Lester Caine
2006-05-17 11:40:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-17 11:57:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-17 20:30:08 UTC
Re: Interface. Gauging interest.
Jack Hudler
2006-05-17 21:04:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Jack Hudler
2006-05-17 21:04:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-17 22:01:51 UTC
Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest.
lcdpublishing
2006-05-18 04:58:52 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-18 05:11:22 UTC
OT Re: Interface. Gauging interest.
Graham Stabler
2006-05-18 05:29:38 UTC
OT Re: Interface. Gauging interest.
Steve Blackmore
2006-05-18 16:31:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-18 20:53:29 UTC
Re: Interface. Gauging interest.
JanRwl@A...
2006-05-18 21:53:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-18 23:18:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mike Pogue
2006-05-19 00:51:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-19 05:49:15 UTC
Re: Interface. Gauging interest.
Peter Reilley
2006-05-19 05:59:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
yracg
2006-05-19 06:22:16 UTC
Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-19 06:58:38 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-19 07:24:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 07:26:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 07:28:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Phil Mattison
2006-05-19 07:49:51 UTC
[CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Mariss Freimanis
2006-05-19 08:29:00 UTC
Re: Interface. Gauging interest.
yracg
2006-05-19 08:31:36 UTC
Re: Interface. Gauging interest.
Wayne Weedon
2006-05-19 08:40:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 08:51:48 UTC
Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 08:55:11 UTC
Re: Interface. Gauging interest.
wanliker@a...
2006-05-19 09:11:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-19 09:37:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:41:18 UTC
Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:47:00 UTC
Re: Interface. Gauging interest.
Codesuidae
2006-05-19 09:48:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Dennis Schmitz
2006-05-19 09:53:38 UTC
Re: Interface. Gauging interest.
John Dammeyer
2006-05-19 09:54:19 UTC
USB CNC (was Interface. Gauging interest.)
Jack Hudler
2006-05-19 09:57:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 10:40:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 10:56:20 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
John Dammeyer
2006-05-19 11:23:37 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
Mike Pogue
2006-05-19 11:59:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Lester Caine
2006-05-19 12:05:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 12:07:56 UTC
RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.)
Mariss Freimanis
2006-05-19 12:27:31 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-19 12:48:01 UTC
RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 12:56:08 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 13:33:20 UTC
Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 13:36:36 UTC
Re: Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 14:00:01 UTC
Re: USB CNC (was Interface. Gauging interest.)
ballendo
2006-05-19 14:06:06 UTC
Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 14:16:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
lcdpublishing
2006-05-19 14:28:40 UTC
Re: PCI interface was ....Interface. Gauging interest.
Alan Marconett
2006-05-19 14:42:25 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
delmar williams
2006-05-19 14:45:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Lester Caine
2006-05-19 15:06:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Wayne C. Gramlich
2006-05-19 15:34:56 UTC
Re: USB CNC (was Interface. Gauging interest.)
Codesuidae
2006-05-19 15:48:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Wayne Weedon
2006-05-19 15:54:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
John Dammeyer
2006-05-19 17:13:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Paul Kelly
2006-05-19 17:19:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Mike Pogue
2006-05-19 17:54:12 UTC
Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Alan Marconett
2006-05-19 17:59:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Anders Wallin
2006-05-19 21:49:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Wayne C. Gramlich
2006-05-20 00:00:48 UTC
Re: USB CNC (was Interface. Gauging interest.)
bob_kellock
2006-05-20 03:18:22 UTC
Re: Interface. Gauging interest.
Les Newell
2006-05-20 05:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
Alan Marconett
2006-05-20 10:59:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Wayne C. Gramlich
2006-05-20 11:58:09 UTC
Re: USB CNC (was Interface. Gauging interest.)
Mariss Freimanis
2006-05-20 13:37:35 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-20 14:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Hugh Prescott
2006-05-20 15:13:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Graham Stabler
2006-05-20 15:57:23 UTC
Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-20 16:00:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC
Dennis Schmitz
2006-05-20 16:48:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ronginger@a...
2006-05-20 17:53:16 UTC
Re: USB CNC (was Interface. Gauging interest.)
Jack Hudler
2006-05-20 19:23:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest.
Jack Hudler
2006-05-20 19:28:08 UTC
RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.
ballendo
2006-05-20 22:05:57 UTC
Re: Interface. Gauging interest.
ballendo
2006-05-20 22:26:51 UTC
Re: USB CNC (was Interface. Gauging interest.)
Mike Pogue
2006-05-21 01:49:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-21 10:26:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)
Alan Marconett
2006-05-21 16:54:05 UTC
Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest.
Mariss Freimanis
2006-06-06 19:39:41 UTC
Re: Interface. Gauging interest.
Fred Smith
2006-06-06 20:44:50 UTC
ncPOD update, was Re: Interface. Gauging interest.
John Stevenson
2006-06-06 22:55:16 UTC
ncPOD update, was Re: Interface. Gauging interest.
Tony Jeffree
2006-06-07 00:20:00 UTC
Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest.
Tony Jeffree
2006-06-07 00:30:33 UTC
Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest.
turbulatordude
2006-06-07 08:34:04 UTC
ncPOD update,
Fred Smith
2006-06-07 11:00:14 UTC
Re: ncPOD update,
Tony Jeffree
2006-06-07 13:19:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,