CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest.

Posted by Lester Caine
on 2006-05-16 00:24:55 UTC
ballendo wrote:

> A pc behaving as a machine controller needs the same respect you'd
> give an embedded controller like the G100. You're not going to
> expect it to do ANYTHING besides what it was designed and installed
> to do. When you treat it--and a pc par port--that way, it/they are
> reliable, repeatable, and IME without incident.

The alternative to the G100 is a nice ITX based PC in a small case next
to the machine, with a network connection back to the 'house' PC. Given
the prices of hardware these days ...

And of cause the next step is to run the Linux EMC stuff on it so there
are no licensing costs :) Once you lose windows THEN you can make it
work properly ;)

--
Lester Caine - G8HFL
-----------------------------
L.S.Caine Electronic Services - http://home.lsces.co.uk
Model Engineers Digital Workshop -
http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
Treasurer - Firebird Foundation Inc. - http://www.firebirdsql.org/index.php

Discussion Thread

Dennis Schmitz 2006-05-12 00:26:44 UTC Interface. Gauging interest. ballendo 2006-05-12 02:33:46 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-12 04:34:40 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-13 09:29:18 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-13 17:57:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. turbulatordude 2006-05-13 18:34:05 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 10:03:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 10:31:40 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 10:57:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 11:21:49 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 12:23:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 12:58:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 13:09:24 UTC Re: Interface. Gauging interest. Mike Pogue 2006-05-15 13:39:03 UTC USB-to-step/direction (was Interface. Gauging interest.) Codesuidae 2006-05-15 13:51:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 14:41:53 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 14:47:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike 2006-05-15 14:53:37 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 14:54:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:07:28 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:08:32 UTC Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:24:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-15 16:25:26 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-15 17:26:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 17:36:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 18:10:03 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:32:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:37:07 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) ballendo 2006-05-15 20:35:11 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 21:38:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. JanRwl@A... 2006-05-15 22:07:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-15 22:11:15 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) JanRwl@A... 2006-05-15 22:19:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 22:24:36 UTC Re: Interface. Gauging interest. Tony Jeffree 2006-05-15 22:32:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dave Halliday 2006-05-15 23:01:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:08:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:13:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:17:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:18:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 00:24:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:30:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 01:08:35 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:16:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:19:38 UTC OT Re: Interface. Gauging interest. ballendo 2006-05-16 01:25:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:32:25 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-16 02:07:21 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-16 04:23:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-16 06:03:14 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 07:49:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-16 08:04:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 08:23:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 09:11:32 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:14:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:23:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 09:36:00 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:42:33 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:49:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:55:54 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 10:03:37 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:05:29 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:19:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 10:39:14 UTC Re: Interface. Gauging interest. Dan Mauch 2006-05-16 11:05:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 11:32:18 UTC Re: Interface. Gauging interest. Dave Halliday 2006-05-16 11:32:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 11:51:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. wanliker@a... 2006-05-16 12:18:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 12:35:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:36:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 12:46:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:53:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 13:03:38 UTC OT Re: Interface. Gauging interest. wanliker@a... 2006-05-16 13:05:51 UTC Interface. Gauging interest. Codesuidae 2006-05-16 14:41:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 14:43:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 15:23:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 15:40:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 15:53:31 UTC Re: Interface. Gauging interest. Steve Blackmore 2006-05-16 17:22:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 17:29:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 18:47:10 UTC Re: Interface. Gauging interest. Jon Elson 2006-05-16 21:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 22:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Steve Blackmore 2006-05-17 00:05:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 05:32:10 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 07:06:18 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 08:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-17 08:55:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 09:22:57 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 09:47:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-17 09:58:14 UTC Irrelevant Gcode?!? wasRe: Interface. Gauging interest. ballendo 2006-05-17 10:00:45 UTC irrelevnat Gcodes was Re: Interface. Gauging interest. ballendo 2006-05-17 10:02:38 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-17 10:13:56 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 10:17:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-17 11:13:43 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-17 11:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-17 11:57:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 20:30:08 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:17 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 22:01:51 UTC Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest. lcdpublishing 2006-05-18 04:58:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-18 05:11:22 UTC OT Re: Interface. Gauging interest. Graham Stabler 2006-05-18 05:29:38 UTC OT Re: Interface. Gauging interest. Steve Blackmore 2006-05-18 16:31:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-18 20:53:29 UTC Re: Interface. Gauging interest. JanRwl@A... 2006-05-18 21:53:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-18 23:18:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-19 00:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 05:49:15 UTC Re: Interface. Gauging interest. Peter Reilley 2006-05-19 05:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 06:22:16 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 06:58:38 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 07:24:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:26:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:28:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-19 07:49:51 UTC [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 08:29:00 UTC Re: Interface. Gauging interest. yracg 2006-05-19 08:31:36 UTC Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 08:40:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 08:51:48 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 08:55:11 UTC Re: Interface. Gauging interest. wanliker@a... 2006-05-19 09:11:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 09:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:41:18 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:47:00 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 09:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:53:38 UTC Re: Interface. Gauging interest. John Dammeyer 2006-05-19 09:54:19 UTC USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-19 09:57:07 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:40:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:56:20 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) John Dammeyer 2006-05-19 11:23:37 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-19 11:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 12:05:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:07:56 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-19 12:27:31 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-19 12:48:01 UTC RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:56:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:33:20 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:36:36 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 14:00:01 UTC Re: USB CNC (was Interface. Gauging interest.) ballendo 2006-05-19 14:06:06 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-19 14:16:09 UTC RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) lcdpublishing 2006-05-19 14:28:40 UTC Re: PCI interface was ....Interface. Gauging interest. Alan Marconett 2006-05-19 14:42:25 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. delmar williams 2006-05-19 14:45:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Lester Caine 2006-05-19 15:06:22 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 15:34:56 UTC Re: USB CNC (was Interface. Gauging interest.) Codesuidae 2006-05-19 15:48:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 15:54:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. John Dammeyer 2006-05-19 17:13:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Paul Kelly 2006-05-19 17:19:27 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Mike Pogue 2006-05-19 17:54:12 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 17:59:40 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Anders Wallin 2006-05-19 21:49:32 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-20 00:00:48 UTC Re: USB CNC (was Interface. Gauging interest.) bob_kellock 2006-05-20 03:18:22 UTC Re: Interface. Gauging interest. Les Newell 2006-05-20 05:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-20 10:59:18 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Wayne C. Gramlich 2006-05-20 11:58:09 UTC Re: USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-20 13:37:35 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 14:14:20 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Hugh Prescott 2006-05-20 15:13:59 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Graham Stabler 2006-05-20 15:57:23 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 16:00:08 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC Dennis Schmitz 2006-05-20 16:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ronginger@a... 2006-05-20 17:53:16 UTC Re: USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-20 19:23:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Jack Hudler 2006-05-20 19:28:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-20 22:05:57 UTC Re: Interface. Gauging interest. ballendo 2006-05-20 22:26:51 UTC Re: USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-21 01:49:23 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 10:26:01 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 16:54:05 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Mariss Freimanis 2006-06-06 19:39:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-06-06 20:44:50 UTC ncPOD update, was Re: Interface. Gauging interest. John Stevenson 2006-06-06 22:55:16 UTC ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:20:00 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:30:33 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. turbulatordude 2006-06-07 08:34:04 UTC ncPOD update, Fred Smith 2006-06-07 11:00:14 UTC Re: ncPOD update, Tony Jeffree 2006-06-07 13:19:30 UTC Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,