CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.)

Posted by Alan Marconett

on 2006-05-20 14:14:20 UTC

Hi Wayne,

Wayne C. Gramlich wrote:

> <snip>
> The LMD18245 is a great chip, but it is hard to get
> one for less than $13 each in the onsey-twosey purchases
> I do. The much maligned L298 is available from Jameco
> for $2.95 each (quantity 1.)
>

Yeah, a little pricey. Does result in a driver board for $40-50 if you
make it yourself. Allegro has some improved chips also. These are all
great for Sherline or Taig sized hardware, or small hardware like my
little router project. the L298 is rather old, and not as durable.

>
> To further complicate things Microchip released the
> ENC28J60 which is a 10BASE-T Ethernet interface chip.
> My interest in USB sort of evaporated with the release
> of the ENC28J60.
>
> -Wayne
>

Another Chip! I can never keep up with MicroChip! And I've heard
rumblings of Ethernet being in Mach and supported by G100. Now when am
I going to get time to check out that!

Alan KM6VV

Discussion Thread

Dennis Schmitz 2006-05-12 00:26:44 UTC Interface. Gauging interest. ballendo 2006-05-12 02:33:46 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-12 04:34:40 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-13 09:29:18 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-13 17:57:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. turbulatordude 2006-05-13 18:34:05 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 10:03:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 10:31:40 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 10:57:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 11:21:49 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 12:23:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 12:58:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 13:09:24 UTC Re: Interface. Gauging interest. Mike Pogue 2006-05-15 13:39:03 UTC USB-to-step/direction (was Interface. Gauging interest.) Codesuidae 2006-05-15 13:51:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 14:41:53 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 14:47:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike 2006-05-15 14:53:37 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 14:54:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:07:28 UTC Re: Interface. Gauging interest. ballendo 2006-05-15 15:08:32 UTC Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:24:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-15 15:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-15 16:25:26 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-15 17:26:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 17:36:42 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-15 18:10:03 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:32:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-15 18:37:07 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) ballendo 2006-05-15 20:35:11 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-15 21:38:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. JanRwl@A... 2006-05-15 22:07:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-15 22:11:15 UTC Re: [CAD_CAM_EDM_DRO] USB-to-step/direction (was Interface. Gauging interest.) JanRwl@A... 2006-05-15 22:19:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-15 22:24:36 UTC Re: Interface. Gauging interest. Tony Jeffree 2006-05-15 22:32:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dave Halliday 2006-05-15 23:01:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:08:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:13:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:17:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 00:18:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 00:24:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-16 00:30:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 01:08:35 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:16:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:19:38 UTC OT Re: Interface. Gauging interest. ballendo 2006-05-16 01:25:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 01:32:25 UTC Re: Interface. Gauging interest. Graham Stabler 2006-05-16 02:07:21 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-16 04:23:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-16 06:03:14 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 07:49:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-16 08:04:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 08:23:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 09:11:32 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:14:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 09:23:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 09:36:00 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:42:33 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:49:07 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 09:55:54 UTC Re: Interface. Gauging interest. ballendo 2006-05-16 10:03:37 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:05:29 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 10:19:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 10:39:14 UTC Re: Interface. Gauging interest. Dan Mauch 2006-05-16 11:05:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. gort38 2006-05-16 11:32:18 UTC Re: Interface. Gauging interest. Dave Halliday 2006-05-16 11:32:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-16 11:51:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. wanliker@a... 2006-05-16 12:18:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 12:35:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:36:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 12:46:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 12:53:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 13:03:38 UTC OT Re: Interface. Gauging interest. wanliker@a... 2006-05-16 13:05:51 UTC Interface. Gauging interest. Codesuidae 2006-05-16 14:41:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-16 14:43:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 15:23:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Codesuidae 2006-05-16 15:40:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-16 15:53:31 UTC Re: Interface. Gauging interest. Steve Blackmore 2006-05-16 17:22:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-16 17:29:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-16 18:47:10 UTC Re: Interface. Gauging interest. Jon Elson 2006-05-16 21:44:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-16 22:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Steve Blackmore 2006-05-17 00:05:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 05:32:10 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 07:06:18 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 08:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Roy J. Tellason 2006-05-17 08:55:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. lcdpublishing 2006-05-17 09:22:57 UTC Re: Interface. Gauging interest. Phil Mattison 2006-05-17 09:47:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-17 09:58:14 UTC Irrelevant Gcode?!? wasRe: Interface. Gauging interest. ballendo 2006-05-17 10:00:45 UTC irrelevnat Gcodes was Re: Interface. Gauging interest. ballendo 2006-05-17 10:02:38 UTC Re: Interface. Gauging interest. lcdpublishing 2006-05-17 10:13:56 UTC Re: Interface. Gauging interest. ballendo 2006-05-17 10:17:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-05-17 11:13:43 UTC Re: Interface. Gauging interest. Lester Caine 2006-05-17 11:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-17 11:57:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 20:30:08 UTC Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:17 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Jack Hudler 2006-05-17 21:04:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-17 22:01:51 UTC Re: Irrelevant Gcode?!? wasRe: Interface. Gauging interest. lcdpublishing 2006-05-18 04:58:52 UTC Re: Interface. Gauging interest. ballendo 2006-05-18 05:11:22 UTC OT Re: Interface. Gauging interest. Graham Stabler 2006-05-18 05:29:38 UTC OT Re: Interface. Gauging interest. Steve Blackmore 2006-05-18 16:31:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-18 20:53:29 UTC Re: Interface. Gauging interest. JanRwl@A... 2006-05-18 21:53:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-18 23:18:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mike Pogue 2006-05-19 00:51:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 05:49:15 UTC Re: Interface. Gauging interest. Peter Reilley 2006-05-19 05:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. yracg 2006-05-19 06:22:16 UTC Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 06:58:38 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 07:24:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:26:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 07:28:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Phil Mattison 2006-05-19 07:49:51 UTC [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Mariss Freimanis 2006-05-19 08:29:00 UTC Re: Interface. Gauging interest. yracg 2006-05-19 08:31:36 UTC Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 08:40:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 08:51:48 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 08:55:11 UTC Re: Interface. Gauging interest. wanliker@a... 2006-05-19 09:11:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 09:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:41:18 UTC Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:47:00 UTC Re: Interface. Gauging interest. Codesuidae 2006-05-19 09:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Dennis Schmitz 2006-05-19 09:53:38 UTC Re: Interface. Gauging interest. John Dammeyer 2006-05-19 09:54:19 UTC USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-19 09:57:07 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:40:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 10:56:20 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) John Dammeyer 2006-05-19 11:23:37 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-19 11:59:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Lester Caine 2006-05-19 12:05:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:07:56 UTC RE: [CAD_CAM_EDM_DRO] USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-19 12:27:31 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-19 12:48:01 UTC RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 12:56:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:33:20 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 13:36:36 UTC Re: Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 14:00:01 UTC Re: USB CNC (was Interface. Gauging interest.) ballendo 2006-05-19 14:06:06 UTC Re: Interface. Gauging interest. Alan Marconett 2006-05-19 14:16:09 UTC RE: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) lcdpublishing 2006-05-19 14:28:40 UTC Re: PCI interface was ....Interface. Gauging interest. Alan Marconett 2006-05-19 14:42:25 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. delmar williams 2006-05-19 14:45:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Lester Caine 2006-05-19 15:06:22 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-19 15:34:56 UTC Re: USB CNC (was Interface. Gauging interest.) Codesuidae 2006-05-19 15:48:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Wayne Weedon 2006-05-19 15:54:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. John Dammeyer 2006-05-19 17:13:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Paul Kelly 2006-05-19 17:19:27 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Mike Pogue 2006-05-19 17:54:12 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Alan Marconett 2006-05-19 17:59:40 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Anders Wallin 2006-05-19 21:49:32 UTC Re: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Wayne C. Gramlich 2006-05-20 00:00:48 UTC Re: USB CNC (was Interface. Gauging interest.) bob_kellock 2006-05-20 03:18:22 UTC Re: Interface. Gauging interest. Les Newell 2006-05-20 05:06:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. Alan Marconett 2006-05-20 10:59:18 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Wayne C. Gramlich 2006-05-20 11:58:09 UTC Re: USB CNC (was Interface. Gauging interest.) Mariss Freimanis 2006-05-20 13:37:35 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 14:14:20 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Hugh Prescott 2006-05-20 15:13:59 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Graham Stabler 2006-05-20 15:57:23 UTC Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-20 16:00:08 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC Dennis Schmitz 2006-05-20 16:48:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ronginger@a... 2006-05-20 17:53:16 UTC Re: USB CNC (was Interface. Gauging interest.) Jack Hudler 2006-05-20 19:23:01 UTC RE: [CAD_CAM_EDM_DRO] Re: PCI interface was ....Interface. Gauging interest. Jack Hudler 2006-05-20 19:28:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Interface. Gauging interest. ballendo 2006-05-20 22:05:57 UTC Re: Interface. Gauging interest. ballendo 2006-05-20 22:26:51 UTC Re: USB CNC (was Interface. Gauging interest.) Mike Pogue 2006-05-21 01:49:23 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 10:26:01 UTC Re: [CAD_CAM_EDM_DRO] Re: USB CNC (was Interface. Gauging interest.) Alan Marconett 2006-05-21 16:54:05 UTC Re: [CAD_CAM_EDM_DRO] RE: USB DLP2232M CNC, Was Re: Interface. Gauging interest. Mariss Freimanis 2006-06-06 19:39:41 UTC Re: Interface. Gauging interest. Fred Smith 2006-06-06 20:44:50 UTC ncPOD update, was Re: Interface. Gauging interest. John Stevenson 2006-06-06 22:55:16 UTC ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:20:00 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. Tony Jeffree 2006-06-07 00:30:33 UTC Re: [CAD_CAM_EDM_DRO] ncPOD update, was Re: Interface. Gauging interest. turbulatordude 2006-06-07 08:34:04 UTC ncPOD update, Fred Smith 2006-06-07 11:00:14 UTC Re: ncPOD update, Tony Jeffree 2006-06-07 13:19:30 UTC Re: [CAD_CAM_EDM_DRO] Re: ncPOD update,