CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ?

on 2006-06-07 08:49:01 UTC
HI Dave,

That's what I'd really like to do. However they don't bring out separate
armature and field windings from the motor.

Goal as you've indicated is to eventually control it from Gcode part program
via a PIC.

Alan KM6VV

>
>
> > I picked the DeWalt trim router also. It is specified as an "AC ONLY"
> > motor, it has brushes, and both armature and field windings. What speed
> > controller can be used on it? A baby VFD?
> >
> > Alan KM6VV
>
> If you have a treadmill motor speed controller, you should be able to
> use that.
>
> there are two AC inputs and 2 Armature outputs.
> there are also 3 leads for a pot input.
> you can use an op-amp fed from a PWM to get a DC output from the PIC
> or PC. that would enable you to control the speed from software.
>
> Dave
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>

Discussion Thread

turbulatordude 2006-06-02 17:51:33 UTC Roland CAMM-3 ? Christian Grunewald 2006-06-02 21:02:34 UTC RE: [CAD_CAM_EDM_DRO] Roland CAMM-3 ? BRIAN FOLEY 2006-06-02 21:05:39 UTC Re: [CAD_CAM_EDM_DRO] Roland CAMM-3 ? turbulatordude 2006-06-02 23:13:57 UTC Re: Roland CAMM-3 ? ballendo 2006-06-03 05:49:23 UTC Re: Roland CAMM-3 ? Christian Grunewald 2006-06-03 15:06:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ? turbulatordude 2006-06-03 21:03:54 UTC Re: Roland CAMM-3 ? Les Newell 2006-06-04 01:52:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ? turbulatordude 2006-06-04 07:45:44 UTC Re: Roland CAMM-3 ? Les Newell 2006-06-04 08:00:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ? Fred Smith 2006-06-04 11:20:23 UTC Re: Roland CAMM-3 ? Mic Arthur 2006-06-05 07:29:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ? turbulatordude 2006-06-05 07:55:42 UTC Re: Roland CAMM-3 ? lanebarr@b... 2006-06-06 10:49:20 UTC Re:Re: Roland CAMM-3 ? Alan Marconett 2006-06-06 11:11:21 UTC SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? Mic Arthur 2006-06-06 11:23:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ? turbulatordude 2006-06-06 13:13:02 UTC Re:Re: Roland CAMM-3 ? Les Newell 2006-06-07 01:33:15 UTC Re: [CAD_CAM_EDM_DRO] SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? turbulatordude 2006-06-07 07:50:42 UTC Re: SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? Alan Marconett 2006-06-07 08:29:27 UTC RE: [CAD_CAM_EDM_DRO] SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? Alan Marconett 2006-06-07 08:49:01 UTC RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? turbulatordude 2006-06-07 10:12:28 UTC Re: SPINDLE speed controller, collets, WAS re: Roland CAMM-3 ? Alan Marconett 2006-06-07 11:52:43 UTC RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets turbulatordude 2006-06-07 13:56:18 UTC Re: SPINDLE speed controller, collets Alan Marconett 2006-06-07 15:11:55 UTC RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets BRIAN FOLEY 2006-06-08 02:47:52 UTC Re: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets Alan Marconett 2006-06-08 08:22:05 UTC RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets turbulatordude 2006-06-08 09:08:43 UTC Re: SPINDLE speed controller, collets BRIAN FOLEY 2006-06-08 09:39:58 UTC Re: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets Alan Marconett 2006-06-08 09:43:14 UTC RE: [CAD_CAM_EDM_DRO] Re: SPINDLE speed controller, collets turbulatordude 2006-06-08 12:16:28 UTC Re:Re: Roland CAMM-3 ? - Lane ?