RE: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ?

Aloha Dave,
If you have a CAM package with a configurable post processor, I can send you
a post out of ArtCAM or I think I have the Roland Software around here
somewhere. Anyway it is probably a .ROL post. Oops, yes I meant .00025, a
quarter thou.

Best Regards,
Christian Grunewald
Precision Modelmaking Technologies
Hawaii
Applications/Technical Representative for Modelmaster
www.modelmaster.com

>From: "turbulatordude" <dave_mucha@...>
>Reply-To: CAD_CAM_EDM_DRO@yahoogroups.com
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: [CAD_CAM_EDM_DRO] Re: Roland CAMM-3 ?
>Date: Sat, 03 Jun 2006 06:13:51 -0000
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Christian Grunewald"
><PrecisionHawaii@...> wrote:
> >
> > Aloha Dave,
> > Why did you find one?
> > Very nice little CNC,
> > Similar to their PNC line,
> > It was their first one.
>
>YES, picked it up today.
>
>it is the older one. White, with a pendant that has 3 rotary wheels.
>
>The photo's I have found make me think newer ones are black and have a
>lot of buttons and one jogging wheel.
>
>(More at bottom)
>
>
> > Accurate to .0025 inch
> > If you can get it cheap, buy it!!
>
> > Most Good CAD/CAM packages will output
> > the proper post for this and most
> > Roland machines. Alot of them are toys,
> > this one is not!!
>
> > Good luck, let us know how it turns out!!
> >
> > Best Regards,
> > Christian Grunewald
> > Precision Modelmaking Technologies
> > Hawaii
> > Applications/Technical Representative for Modelmaster
> > www.modelmaster.com
>
>
>
>In looking at what I can find on the net, it seems that this does not
>accept standard G-Codes.
>
>If that is the case, then I need to devise some plan of attack.
>
>either get software that will run this, or swap out the drivers to
>something that will take step and direction.
>
>Do you know if there is any type of manual on-line ?
>
>I sure would like to turn it on and see it work.
>
>As for accuracy, I would have hoped it would do better than 2-1/2
>thou. should that be 0.00025?
>
>Dave
>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... davemucha@...
>[Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/