Re: Printed Circuit Board Supplies

Dan,
I have sent those Contour2 program people two e-mails, one in English and one in German, no reply...
However I have a lot of trouble with my name being German, I think they think I'm messing them around...
I spent 2 years in Germany and the problem was even worse...!

Do you have any sales persons e-mail that I could use ?

Thanks for the registration tip. I'm already using wood, never occurred to be to do that... It would be even easier if CNCPro
was able to
restore last X,Y,Z coordinates across sessions, then I would not have to zero the x,y every time...

regards
Hans Wedemeyer

Dan Mauch wrote:

> From: "Dan Mauch" <dmauch@...>
>
> I order some boards about 2 months ago and it seemed like their price was
> about the same so it must have just gone up. In any case I hope to start
> machining the traces and be done with the chemicals. I will be using the
> countour2 software on a little dyna2400 milling machine to make my protos.
> I have been making and drilling pcb's for years I noticed your approach to
> registration. I tried that some time ago and it seemed inconsistent.
> Here is what I do. I select the location of two holes kitty corner to the
> board. Using mdi, I drill and mark those two holes (in the wood base). Then
> I drill the coresponding holes on the pcb by hand . I use the center type
> pads that print a small hole. Then using two pins I place the board over
> the holes drilled into the base(wood) , secure the board in place and then
> remove the pins. Perfect registraton.
> Dan
> -----Original Message-----
> From: hansw <hansw@...>
> To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
> Date: Tuesday, February 08, 2000 3:24 PM
> Subject: Re: [CAD_CAM_EDM_DRO]Printed Circuit Board Supplies
>
> >From: hansw <hansw@...>
> >
> >Hi Dan,
> >They are the people I'm talking about... Last time they had discount for
> 10+ of that size, now they list it at $13.30 ....
> >
> >The truth is there is about 25cents worth of PCB in the package, when I
> paid $7.20 a board I thought it was too high...
> >
> >If I can't find anyone else I will call and ask them for a 10+ discount...
> Seem to remember there was an outfit in New York that
> >sold it.
> >
> >hansw
> >
> >Dan Mauch wrote:
> >
> >> From: "Dan Mauch" <dmauch@...>
> >>
> >> Try circuit specialist in AZ 1-800-528-1417
> >> Dan
> >> -----Original Message-----
> >> From: hansw <hansw@...>
> >> To: cad <CAD_CAM_EDM_DRO@onelist.com>
> >> Date: Tuesday, February 08, 2000 2:23 PM
> >> Subject: [CAD_CAM_EDM_DRO]Printed Circuit Board Supplies
> >>
> >> >From: hansw <hansw@...>
> >> >
> >> >Just checked with my supplier of double sided pre sensitized fiberglass
> >> >circuit board material.
> >> >
> >> >The prices are just crazy. I also looked at my last purchase of 10
> >> >boards 6" x 9" inches for $72
> >> >the same boards today are over $133 ! close to double price in 9
> >> >months...
> >> >
> >> >I looking for a different source, any recommendation, in the USA...
> >> >
> >> >Hans Wedemeyer
> >> >
> >> >
> >> >
> >> >--------------------------- ONElist Sponsor ----------------------------
> >> >
> >> >$10 Savings on Pet Valentine Gifts.
> >> >Looking for that pet-perfect Valentine�s Day gift?
> >> >Click here for $10 off purchases of $25 or more.
> >> ><a href=" http://clickme.onelist.com/ad/NewPetopia2 ">Click Here</a>
> >> >
> >> >------------------------------------------------------------------------
> >> >
> >> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> >> discussion of shop built systems in the above catagories.
> >> >To Unsubscribe, read archives, change to or from digest.
> >> >Go to: http://www.onelist.com/isregistered.cgi
> >> >Log on, and you will go to Member Center, and you can make changes
> there.
> >> >For the FAQ, go to http://www.ktmarketing.com/faq.html
> >> >bill,
> >> >List Manager
> >> >
> >> >
> >>
> >> --------------------------- ONElist Sponsor ----------------------------
> >>
> >> Body Paint, Chocolates, & Roses Oh My.
> >> <a href=" http://clickme.onelist.com/ad/SparksValentine8 ">Click Here</a>
> >>
> >> ------------------------------------------------------------------------
> >>
> >> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> >> To Unsubscribe, read archives, change to or from digest.
> >> Go to: http://www.onelist.com/isregistered.cgi
> >> Log on, and you will go to Member Center, and you can make changes there.
> >> For the FAQ, go to http://www.ktmarketing.com/faq.html
> >> bill,
> >> List Manager
> >
> >
> >--------------------------- ONElist Sponsor ----------------------------
> >
> >eGroups' Valentine's Day Gift Guide - Shop Here Now:
> ><a href=" http://clickme.onelist.com/ad/SparksValentine4 ">Click Here</a>
> >
> >------------------------------------------------------------------------
> >
> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> >To Unsubscribe, read archives, change to or from digest.
> >Go to: http://www.onelist.com/isregistered.cgi
> >Log on, and you will go to Member Center, and you can make changes there.
> >For the FAQ, go to http://www.ktmarketing.com/faq.html
> >bill,
> >List Manager
> >
> >
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Don�t buy your Valentine a Gift by clicking here.
> <a href=" http://clickme.onelist.com/ad/SparksValentine11 ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager