RE: Printed Circuit Board Supplies
Posted by
Ted Robbins
on 2000-02-10 19:19:48 UTC
At 11:55 PM 2/9/00 -0700, you wrote:
As I said in my posts on PC boards, slip a tightly stresached length of
vinyl tubing around the rollers.
Shield the light from the halogen bulb so it doesn't fall on the boards,
because it may contain more uv than you want.
Ted
>From: "Tim Goldstein" <timg@...>Great Idea. Let me add two suggestions:
>
>Hans,
>
>I have been thinking about how to build a laminator on the cheap and the
>line I am pursuing is to get the fuser unit from a laser printer or copier
>and use that. All the fuser units I am familiar with have a halogen bulb
>inside the heated roller to heat it up and then have thermistors external to
>the roller to control the temperature.
As I said in my posts on PC boards, slip a tightly stresached length of
vinyl tubing around the rollers.
Shield the light from the halogen bulb so it doesn't fall on the boards,
because it may contain more uv than you want.
Ted
Discussion Thread
hansw
2000-02-08 14:21:46 UTC
Printed Circuit Board Supplies
Dan Mauch
2000-02-08 14:56:15 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 15:21:58 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 16:20:55 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 16:39:25 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 16:54:23 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 17:09:49 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 21:28:34 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 21:36:20 UTC
Re: Printed Circuit Board Supplies
Area51tats@a...
2000-02-09 03:43:49 UTC
Re: Printed Circuit Board Supplies
paul@A...
2000-02-09 03:43:49 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 06:40:55 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 06:44:07 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 07:51:41 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-09 08:03:02 UTC
Re: Printed Circuit Board Supplies
Leslie Watts
2000-02-09 08:29:56 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 09:14:51 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 12:18:50 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 12:42:06 UTC
Re: Printed Circuit Board Supplies
SNTLewis@a...
2000-02-09 12:48:53 UTC
Re: Printed Circuit Board Supplies
Harrison, Doug
2000-02-09 14:25:19 UTC
RE: Printed Circuit Board Supplies
Area51tats@a...
2000-02-09 14:35:02 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 14:58:18 UTC
Re: Printed Circuit Board Supplies
paul@A...
2000-02-09 14:58:18 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 16:00:06 UTC
Re: Printed Circuit Board Supplies
Ward M.
2000-02-09 19:26:49 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-09 19:50:17 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 20:38:20 UTC
Re: Printed Circuit Board Supplies
Tim Goldstein
2000-02-09 22:55:36 UTC
RE: Printed Circuit Board Supplies
Jon Elson
2000-02-09 23:23:06 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 23:36:51 UTC
Re: Printed Circuit Board Supplies
Jeff DelPapa
2000-02-10 06:54:26 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-10 12:04:08 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 17:59:28 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 18:19:45 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 19:19:48 UTC
RE: Printed Circuit Board Supplies
hansw
2000-02-10 19:46:52 UTC
Re: Printed Circuit Board Supplies
Ian Wright
2000-02-11 02:12:23 UTC
Re: Printed Circuit Board Supplies
Brian Bartholomew
2000-02-11 06:05:39 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-11 05:53:19 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-11 08:15:29 UTC
Re: Printed Circuit Board Supplies