Re: Printed Circuit Board Supplies
Posted by
SNTLewis@a...
on 2000-02-09 12:48:53 UTC
Err, I have been trying to follow this thread and am hopelessly lost. I
currently use GC-Electronics pre-sensitized boards to make prototypes.
Apparently there is a "dry" system out there. I have tried the
Toner-Transfer-System from Digikey (or Mouser) and found it lacking in boards
over 3 square inches. I don't make a lot of boards per run or year, but the
"dry film" intrigues me.
Can someone direct to a URL or site that has this information?
In His Service+
Stan Lewis
currently use GC-Electronics pre-sensitized boards to make prototypes.
Apparently there is a "dry" system out there. I have tried the
Toner-Transfer-System from Digikey (or Mouser) and found it lacking in boards
over 3 square inches. I don't make a lot of boards per run or year, but the
"dry film" intrigues me.
Can someone direct to a URL or site that has this information?
In His Service+
Stan Lewis
Discussion Thread
hansw
2000-02-08 14:21:46 UTC
Printed Circuit Board Supplies
Dan Mauch
2000-02-08 14:56:15 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 15:21:58 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 16:20:55 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 16:39:25 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 16:54:23 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-08 17:09:49 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 21:28:34 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-08 21:36:20 UTC
Re: Printed Circuit Board Supplies
Area51tats@a...
2000-02-09 03:43:49 UTC
Re: Printed Circuit Board Supplies
paul@A...
2000-02-09 03:43:49 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 06:40:55 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 06:44:07 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 07:51:41 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-09 08:03:02 UTC
Re: Printed Circuit Board Supplies
Leslie Watts
2000-02-09 08:29:56 UTC
Re: Printed Circuit Board Supplies
Dan Mauch
2000-02-09 09:14:51 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 12:18:50 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 12:42:06 UTC
Re: Printed Circuit Board Supplies
SNTLewis@a...
2000-02-09 12:48:53 UTC
Re: Printed Circuit Board Supplies
Harrison, Doug
2000-02-09 14:25:19 UTC
RE: Printed Circuit Board Supplies
Area51tats@a...
2000-02-09 14:35:02 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 14:58:18 UTC
Re: Printed Circuit Board Supplies
paul@A...
2000-02-09 14:58:18 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 16:00:06 UTC
Re: Printed Circuit Board Supplies
Ward M.
2000-02-09 19:26:49 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-09 19:50:17 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-09 20:38:20 UTC
Re: Printed Circuit Board Supplies
Tim Goldstein
2000-02-09 22:55:36 UTC
RE: Printed Circuit Board Supplies
Jon Elson
2000-02-09 23:23:06 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-09 23:36:51 UTC
Re: Printed Circuit Board Supplies
Jeff DelPapa
2000-02-10 06:54:26 UTC
Re: Printed Circuit Board Supplies
Jon Elson
2000-02-10 12:04:08 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 17:59:28 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 18:19:45 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-10 19:19:48 UTC
RE: Printed Circuit Board Supplies
hansw
2000-02-10 19:46:52 UTC
Re: Printed Circuit Board Supplies
Ian Wright
2000-02-11 02:12:23 UTC
Re: Printed Circuit Board Supplies
Brian Bartholomew
2000-02-11 06:05:39 UTC
Re: Printed Circuit Board Supplies
hansw
2000-02-11 05:53:19 UTC
Re: Printed Circuit Board Supplies
Ted Robbins
2000-02-11 08:15:29 UTC
Re: Printed Circuit Board Supplies