Re: [CAD_CAM_EDM_DRO] gecko's and voltage

I sent them an email about the same thing, but bigger voltage.

I'd like to use a HD 240/120 stepdown transformer to supply some servo
motors. Using 120V as the source, we get 60V AC output, which is a bit
under 85V DC when rectified. Furthermore, the power around here runs
higher than 120VAC. I've measured 87VDC on the output of the power
supply circuit.

I haven't received a reply from them yet and I sent that email a week
ago.

Kim

On Sat, 2003-07-05 at 11:27, cnchomeman wrote:
> I bought some gecko320's. My powersupply (transformer/bridge/cap)
> measures 80.8 volts no load. This is a whole .8 volts over the max.
> Anyone have any comments on this? I am currently running on 65 volts
> (my transformer has a few taps). I would like to try the 80.8 volts,
> but am new to gecko's and don't want to let the smoke out.
>
> Eric
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Kim Lux <lux@...>