Re: gecko's and voltage
Posted by
Mariss Freimanis
on 2003-07-05 22:29:42 UTC
Dave,
Thanks for the info. I felt it was improper to ask what MOSFETs Rutex
used. I had bet with myself it was IRF540s. Not too many 120V MOSFETs
around to prudently justify a 100V drive rating.
Mariss
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
Thanks for the info. I felt it was improper to ask what MOSFETs Rutex
used. I had bet with myself it was IRF540s. Not too many 120V MOSFETs
around to prudently justify a 100V drive rating.
Mariss
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
> >
> > Interesting. The Rutex drives are rated at 100V and they use
> IRF540N's.
> > Basically the same except for higher current. The instructions
>
> Dave
>
> ( could read between the lines on Mariss's post that folks are now
> going to push envleope and try to edge up the published limit.)
Discussion Thread
cnchomeman
2003-07-05 13:36:51 UTC
gecko's and voltage
Kim Lux
2003-07-05 13:43:38 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Lee Studley
2003-07-05 13:44:48 UTC
Re: gecko's and voltage
Lee Studley
2003-07-05 13:56:08 UTC
Re: gecko's and voltage
Andrew Mawson
2003-07-05 14:03:31 UTC
Re: gecko's and voltage
Kim Lux
2003-07-05 14:04:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Lee Studley
2003-07-05 14:20:21 UTC
Re: gecko's and voltage
Chris Baugher
2003-07-05 14:34:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
JanRwl@A...
2003-07-05 14:50:47 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Kim Lux
2003-07-05 14:59:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Kim Lux
2003-07-05 15:03:29 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Mariss Freimanis
2003-07-05 16:40:31 UTC
Re: gecko's and voltage
Chris Baugher
2003-07-05 17:53:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Jon Elson
2003-07-05 18:41:21 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Jon Elson
2003-07-05 18:45:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Jon Elson
2003-07-05 18:51:12 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
turbulatordude
2003-07-05 20:28:58 UTC
Re: gecko's and voltage
Tim Goldstein
2003-07-05 20:38:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Tim Goldstein
2003-07-05 20:45:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
JanRwl@A...
2003-07-05 20:47:29 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Jon Elson
2003-07-05 22:27:30 UTC
Re: [CAD_CAM_EDM_DRO] gecko's and voltage
Mariss Freimanis
2003-07-05 22:29:42 UTC
Re: gecko's and voltage
Kim Lux
2003-07-05 22:43:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Kim Lux
2003-07-05 23:06:50 UTC
RE: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
rotarysmp
2003-07-06 01:56:59 UTC
Re: gecko's and voltage
stevenson_engineers
2003-07-06 05:47:38 UTC
Re: gecko's and voltage
mmurray701
2003-07-06 08:40:14 UTC
Re: gecko's and voltage
Tim Goldstein
2003-07-06 09:29:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
turbulatordude
2003-07-06 10:09:57 UTC
Re: gecko's and voltage - Gecko Warrantee
cnchomeman
2003-07-06 10:32:26 UTC
Re: gecko's and voltage
cnchomeman
2003-07-06 10:33:26 UTC
Re: gecko's and voltage - Gecko Warrantee
turbulatordude
2003-07-06 10:34:52 UTC
Re: gecko's and voltage
Lee Studley
2003-07-06 12:19:06 UTC
Re: gecko's and voltage
Jon Elson
2003-07-06 12:50:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage - Gecko Warrantee
Kim Lux
2003-07-06 21:39:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Mariss Freimanis
2003-07-06 23:03:30 UTC
Re: gecko's and voltage
Tony Jeffree
2003-07-06 23:35:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Tony Jeffree
2003-07-07 00:48:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
Vince Negrete
2003-07-07 02:46:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: gecko's and voltage
turbulatordude
2003-07-07 06:22:54 UTC
Re: gecko's and voltage
mmurray701
2003-07-07 08:22:27 UTC
Re: gecko's and voltage
washcomp
2003-08-15 19:55:33 UTC
Re: gecko's and voltage - For Mariss