CAD CAM EDM DRO - Yahoo Group Archive

Re: Phase converter questions

Posted by Lee Studley
on 2004-01-18 04:09:35 UTC
Hi,
Im my situation, I've got a 4hp spindle motor on my 4J SeriesII BP.
I found a 25hp VFD on Ebay for a bargain price, and it has been
working well for me on single phase 220vac. One huge benefit is the
reduce startup current needed as compared to spinning up a 7.5hp
idler then the 4hp spindle. I was popping a large breaker at the fuse
box periodically before the VFD. Now the current draw never seems to
go over 10 to 15amps tops ( avg 7.5 amps ).
As an added benefit, the VFD does the motor reversing required for
the other speed range on Varispeed Bridgeports.
Oh yeah, The shop is much quieter also now.
-Lee

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>
>
> Peter Renolds wrote:
>
> >Keep in mind most VFD's will generally only work on single phase
power
> >up to about a 3 HP motor size. After that, they require 3 phase
power
> >on the input side.
> >
> Yes, this is the way the manufacturers rate them. However, it
turns out
> that

Discussion Thread

jlsmith269 2004-01-17 09:31:30 UTC Phase converter questions rawen2 2004-01-17 10:49:32 UTC Re: Phase converter questions Peter Renolds 2004-01-17 11:18:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Bob McKnight 2004-01-17 12:28:54 UTC Re: [CAD_CAM_EDM_DRO] Phase converter questions Jon Elson 2004-01-17 20:26:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Lee Studley 2004-01-18 04:09:35 UTC Re: Phase converter questions Robin Szemeti 2004-01-18 04:48:56 UTC Re: [CAD_CAM_EDM_DRO] Phase converter questions jlsmith269 2004-01-18 07:17:28 UTC Re: Phase converter questions johnatjandj 2004-01-18 07:27:59 UTC Re: Phase converter questions Peter Renolds 2004-01-18 07:57:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions jlsmith269 2004-01-18 10:22:23 UTC Re: Phase converter questions Robin Szemeti 2004-01-18 11:33:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Scot 2004-01-18 12:01:28 UTC Re: Phase converter questions doug98105 2004-01-18 14:33:38 UTC Re: Phase converter questions Bob McKnight 2004-01-18 14:59:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Garage door openers Shawncd 2004-01-18 16:52:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Shawncd 2004-01-18 16:54:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Garage door openers Bill P @ ... 2004-01-18 17:28:52 UTC Re: [CAD_CAM_EDM_DRO] Rotary Phase Converter Noise Jon Elson 2004-01-18 20:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Raymond Heckert 2004-01-19 16:14:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions