CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions

Posted by Peter Renolds
on 2004-01-18 07:57:56 UTC
Hi Lee and others,

Thanks for letting me (and everyone) know that the bigger VFD's will
work on single phase input power - with appropriate de-rating, of
course. I had just assumed that there was a difference in the circuitry
to synthesize the three phases that wasn't applicable at the higher
power levels. It's good to know that this is generally not the case.
It opens up more sizes of VFD's for consideration in the home shop!

Cheers, Peter

Lee Studley wrote:

>Hi,
>Im my situation, I've got a 4hp spindle motor on my 4J SeriesII BP.
>I found a 25hp VFD on Ebay for a bargain price, and it has been
>working well for me on single phase 220vac. One huge benefit is the
>reduce startup current needed as compared to spinning up a 7.5hp
>idler then the 4hp spindle. I was popping a large breaker at the fuse
>
>
>
>

Discussion Thread

jlsmith269 2004-01-17 09:31:30 UTC Phase converter questions rawen2 2004-01-17 10:49:32 UTC Re: Phase converter questions Peter Renolds 2004-01-17 11:18:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Bob McKnight 2004-01-17 12:28:54 UTC Re: [CAD_CAM_EDM_DRO] Phase converter questions Jon Elson 2004-01-17 20:26:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Lee Studley 2004-01-18 04:09:35 UTC Re: Phase converter questions Robin Szemeti 2004-01-18 04:48:56 UTC Re: [CAD_CAM_EDM_DRO] Phase converter questions jlsmith269 2004-01-18 07:17:28 UTC Re: Phase converter questions johnatjandj 2004-01-18 07:27:59 UTC Re: Phase converter questions Peter Renolds 2004-01-18 07:57:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions jlsmith269 2004-01-18 10:22:23 UTC Re: Phase converter questions Robin Szemeti 2004-01-18 11:33:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Scot 2004-01-18 12:01:28 UTC Re: Phase converter questions doug98105 2004-01-18 14:33:38 UTC Re: Phase converter questions Bob McKnight 2004-01-18 14:59:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Garage door openers Shawncd 2004-01-18 16:52:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Shawncd 2004-01-18 16:54:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Garage door openers Bill P @ ... 2004-01-18 17:28:52 UTC Re: [CAD_CAM_EDM_DRO] Rotary Phase Converter Noise Jon Elson 2004-01-18 20:28:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions Raymond Heckert 2004-01-19 16:14:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Phase converter questions