Re: [CAD_CAM_EDM_DRO] Gecko problems - What is going on?

I totally agree Les. I rarely read about a G320/340 blowing. I lost one because I didn't have the 100 volt 1000uF capacitor at each drive. My machine was idle and there was a few loud clunks and pops. Consulting Jon Elson and others it was determined that it was obviously spikes on the line coming in and the power supply was making that noise. Lost a drive as a result and it only blew the $2.00 cap inside the drive that I replaced and its back in service. Adding the large Caps at each Gecko is a must. They help protect the drives from line spikes and also assist in filtering the current going to the drive. Before I added them the Z motor driving the Bridgeport knee would warm significantly after an hour. Now I can drill holes all day and it stays cool. Made a world of difference.

The stepper drives are the ones that are problematic. It really isnt the drive itself, they just require more care in setting up and are not as forgiving as the servo drives. They are much more complex from what I've read. Servo drives rarely ever blow. Bad connection on a stepper drive its gone. Bad connection on a servo drive and it just doesnt move until its reconnected.

Ron

Les Newell <lesnewell@...> wrote:

It is the stepper drives that seem to have a high mortality rate with
bigger motors. As far as I know the servos are rock solid. I have
toasted 2 stepper drives but the servo drives are still working fine.

Les

lcdpublishing wrote:

>There appears to be a number of people reporting problems of "Blowing"
>Gecko servo drives. As Gecko has such a solid reputation overall
>(many, many, positive posts), I am wondering what is going on.
>
>Is there something inherent in the design, wherein if you do "this"
>then the drive will "Blow"? Just seems very strange that something
>that works for a couple of months (years whatever), can suddenly blow.
>I am planning a servo driven machine right now and I sure don't want to
>end up watching the drives blow every couple of months because I
>did "Something" that no one can determine what the cause is. This is
>sort of "X files" spooky stuff.
>
>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









[Non-text portions of this message have been removed]