RE: [CAD_CAM_EDM_DRO] mach3 question
Posted by
Dave Halliday
on 2009-12-04 23:43:36 UTC
The coordinate system assumes that the workpiece is stationary and the
spindle is moving. To increment X, the table will move to the left.
Takes a little time to wrap your head around but it becomes second nature...
Dave
spindle is moving. To increment X, the table will move to the left.
Takes a little time to wrap your head around but it becomes second nature...
Dave
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Leslie Newell
> Sent: Friday, December 04, 2009 8:40 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] mach3 question
>
> Hi Chuck,
>
> Are the keys the wrong way round? The right key should move the table
> left. This seems wrong but it is correct. The jog keys should control
> the cutter's position relative to the work. Imagine you are
> stood on the
> table. Pressing the right key moves the table left so as you
> are moving
> with the table the cutter moves to your right.
>
> Les
>
> ebiz_59 wrote:
> > Our science and tech club finally got a used minimill (X2)
> with cnc and Xylotec controller running using Mach3. Woohoo,
> we have entered the 21st century! One issue we are having
> though is that when running the mill using Mach3 and the
> computer keyboard, the key directions seem to be reversed.
> Where did we mess up in setup? Is that in the configuration
> of pins setup?? This is all new to us and way cool to
> actually see something move, but then we realized XY and ?Z?
> were all moving opposite the direction of the arrow keys -
> took a little wind out of our sails. thanks, Chuck
> >
> >
> >
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
Discussion Thread
ebiz_59
2009-12-04 08:11:58 UTC
mach3 question
Jack McKie
2009-12-04 08:21:33 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question
Dan Mauch
2009-12-04 08:23:09 UTC
mach3 question
Leslie Newell
2009-12-04 08:39:42 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question
Art Eckstein
2009-12-04 08:48:50 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question
Chuck Merja
2009-12-04 09:33:30 UTC
RE: [CAD_CAM_EDM_DRO] mach3 question
Chuck Merja
2009-12-04 09:33:44 UTC
RE: [CAD_CAM_EDM_DRO] mach3 question
Chuck Merja
2009-12-04 22:23:46 UTC
RE: [CAD_CAM_EDM_DRO] mach3 question_2
Dave Halliday
2009-12-04 23:43:36 UTC
RE: [CAD_CAM_EDM_DRO] mach3 question
Danny Miller
2009-12-04 23:53:13 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question_2
Dan Mauch
2009-12-05 12:21:53 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question_2
Roland Jollivet
2009-12-05 12:22:07 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question_2
Alfredo Sola
2009-12-05 12:22:11 UTC
Hello
imserv1
2009-12-06 08:23:05 UTC
Re: Hello
johann_ohnesorg
2009-12-07 15:32:04 UTC
Re: Hello
Chuck Merja
2009-12-10 04:03:11 UTC
Re: [CAD_CAM_EDM_DRO] mach3 question_2
Alfredo Sola
2009-12-10 19:20:57 UTC
Couplings
johann_ohnesorg
2009-12-11 09:39:05 UTC
Re: Couplings
Andrew Werby
2009-12-11 11:18:18 UTC
Re: Couplings
556RECON
2009-12-11 15:49:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Couplings
Will Holding
2009-12-11 21:13:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Couplings
cncnovice
2009-12-12 10:55:49 UTC
Re: Couplings
cncnovice
2009-12-12 11:00:31 UTC
Re: Couplings
Andrew Werby
2009-12-13 12:22:16 UTC
Couplings
Peter Homann
2009-12-13 14:48:02 UTC
Re: [CAD_CAM_EDM_DRO] Couplings
david@f...
2009-12-13 23:09:39 UTC
Re: [CAD_CAM_EDM_DRO] Couplings
tjwal
2009-12-14 09:12:38 UTC
Re: Couplings
Alfredo Sola
2009-12-14 21:26:47 UTC
Couplings
diazden
2009-12-14 23:01:47 UTC
Re: Couplings
rhaag71
2009-12-30 15:59:44 UTC
Re: Couplings
Randall Wink
2009-12-31 12:41:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Couplings