CAD CAM EDM DRO - Yahoo Group Archive

Re: Couplings

Posted by cncnovice
on 2009-12-12 11:00:31 UTC
Sorry, DumpsterCNc address is http://www.dumpstercnc.com/
JohnC

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "cncnovice" <crcitser@...> wrote:
>
> If your machine is like the FireBall G90 I have, then a solid coupling may generally work satisfactorily. However, if your machine is tight and ridgid, then a more forgiving coupling might be a better choice. Check out at DumpsterCNC (http://www.dumpstercnc.com/lexible). I used them on my FireBall when I changed to higher precision lead screws and anti-backlash lead nuts.
>
> Regards,
> John Champlain
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Will Holding <76lancia@> wrote:
> >
> > It's not so easy for some of us to make those work- a coupling with a little
> > compliance is easier to set up. I found the helical ones typically don't
> > have very high torque ratings (the ones I found) before they aren't really
> > backlash free (they distort under torsion).
> >
>

Discussion Thread

ebiz_59 2009-12-04 08:11:58 UTC mach3 question Jack McKie 2009-12-04 08:21:33 UTC Re: [CAD_CAM_EDM_DRO] mach3 question Dan Mauch 2009-12-04 08:23:09 UTC mach3 question Leslie Newell 2009-12-04 08:39:42 UTC Re: [CAD_CAM_EDM_DRO] mach3 question Art Eckstein 2009-12-04 08:48:50 UTC Re: [CAD_CAM_EDM_DRO] mach3 question Chuck Merja 2009-12-04 09:33:30 UTC RE: [CAD_CAM_EDM_DRO] mach3 question Chuck Merja 2009-12-04 09:33:44 UTC RE: [CAD_CAM_EDM_DRO] mach3 question Chuck Merja 2009-12-04 22:23:46 UTC RE: [CAD_CAM_EDM_DRO] mach3 question_2 Dave Halliday 2009-12-04 23:43:36 UTC RE: [CAD_CAM_EDM_DRO] mach3 question Danny Miller 2009-12-04 23:53:13 UTC Re: [CAD_CAM_EDM_DRO] mach3 question_2 Dan Mauch 2009-12-05 12:21:53 UTC Re: [CAD_CAM_EDM_DRO] mach3 question_2 Roland Jollivet 2009-12-05 12:22:07 UTC Re: [CAD_CAM_EDM_DRO] mach3 question_2 Alfredo Sola 2009-12-05 12:22:11 UTC Hello imserv1 2009-12-06 08:23:05 UTC Re: Hello johann_ohnesorg 2009-12-07 15:32:04 UTC Re: Hello Chuck Merja 2009-12-10 04:03:11 UTC Re: [CAD_CAM_EDM_DRO] mach3 question_2 Alfredo Sola 2009-12-10 19:20:57 UTC Couplings johann_ohnesorg 2009-12-11 09:39:05 UTC Re: Couplings Andrew Werby 2009-12-11 11:18:18 UTC Re: Couplings 556RECON 2009-12-11 15:49:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Couplings Will Holding 2009-12-11 21:13:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Couplings cncnovice 2009-12-12 10:55:49 UTC Re: Couplings cncnovice 2009-12-12 11:00:31 UTC Re: Couplings Andrew Werby 2009-12-13 12:22:16 UTC Couplings Peter Homann 2009-12-13 14:48:02 UTC Re: [CAD_CAM_EDM_DRO] Couplings david@f... 2009-12-13 23:09:39 UTC Re: [CAD_CAM_EDM_DRO] Couplings tjwal 2009-12-14 09:12:38 UTC Re: Couplings Alfredo Sola 2009-12-14 21:26:47 UTC Couplings diazden 2009-12-14 23:01:47 UTC Re: Couplings rhaag71 2009-12-30 15:59:44 UTC Re: Couplings Randall Wink 2009-12-31 12:41:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Couplings