Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement

No one who has put a Geckodrive on a 48v 7.3A power supply has ever
regretted it. They DO regret the time they wasted with obsolete drive
tech that doesn't cut it for CNC use.

It's totally worth it. If you don't have modern low-voltage steppers,
you might wanna look at replacing those too.

G540 is about $250... a little pricey, but not that pricey considering
how much better they are than anything else.

Danny

On 11/13/2011 1:02 AM, ebiz_59 wrote:
> Murphy bit the Xylotex box on our minimill tonight. It appears as though the 24V 6A power supply gave up the ghost - just when we were FINALLY making our first part for our FTC robot.
>
> So I need some ideas for replacing this power supply quickly. I think I saw a 30V power supply on an HP printer the other day, but I'm thinking it was only a couple amps. And I think I might have a 15-20V 4ish amp laptop supply lying around.
>
> Any other thots? And what are the odds that the Xylotex drives are OK if this power supply board is only putting out like 1.5V? Should I be looking for another set of stepper drivers too?
>
> Ugh! Chuck
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
>