Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement

On 11/13/2011 9:16 AM, "hanermo" - CNC 6-axis Designs wrote:
> I agree, except I would never use a 540.
> The solution is good, but a packed solution with no disable per axis
> cripples it.
> G251 drives are a better choice.
> I have 5 g251s, 5 g320s, 3 g203vs, 8 axis chinese low speed drives, 1
> granite devices servo drive.
>
>
>> 100% agree with Danny. My Taig ran through HobbyCNC and Xylotex drives
>> before I ditched them for a G540. Best $300 I spent on the entire system.
>>
>> Sent from a mobile device.
>>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
>